Tag Archives: Special Feature

SH Garage: Gone To The Rallye

<!–

 



SH Garage: Gone To The Rallye

 

‘Not Great’ Planning Mode

 

The best part of an adventure is the planning, right? Yes, and no. The best part of the adventure to me is just saying ‘yes’ to things and doing it. Sometimes it all goes off without a hitch; other times you’re seeing the back of a recovery truck. But hey, it’s all part of it.

While many of the other Speedhunters are incredibly organised people (looking right at Paddy McGrath), I’m just a little… looser.

Chasing_The_RAC_Pic_By_CianDon (44)

Sure, to get to events, and especially a pretty strictly-scheduled rally, does take a degree of planning, but I can quite happily leave a lot of stuff to the very last minute, or even worse, to chance.

Chasing_The_RAC_Pic_By_CianDon (2)

My process is simple: I see an event; I spend about 15 minutes online checking out how feasible it is to get there; I get a hotel booked with free cancellation (and no prepayment for absolute minimum commitment); and then forget all about until it’s pretty much time to go.

Case in point: The 2021 Roger Albert Clark (RAC) Rally.

Chasing_The_RAC_Pic_By_CianDon (59)

It was the start of May when I decided that the RAC was a possibility, a full six months before the event. When did I book vital things like a ferry or even decide what car I’d drive for the week-long odyssey? I can hear Paddy wincing, but a whole three days before. Booked on Sunday afternoon, travel on Wednesday morning.

DSC_8135

Normally I’d have to decide which car to take, but my hand was forced this time after I sold my Hyundai i30N a few days before the event.

The Hyundai was an amazing car and I enjoyed every single one of the 21,000km we spent together, but I was paying a pretty sizeable chunk of cash every month for the privilege. While trying to simultaneously save for a house deposit, something had to give.

Rallye_Omologato_2_Pic_By_CianDon (77)

Hyundai gone, attention turned to my somewhat neglected 106 Rallye.

The little Peugeot and I had been pretty distant for a few months. A busy work schedule meant it was nearly three months since I’d sat behind its wheel, but the time had not been wasted. It got a run to Rallye Omologato 2 in the hands of Maurice Malone, and then went in for some mechanical work. Owning an older performance car – with 103bhp I’m clinging to that title – requires continuous preventative maintenance, but little updates also make life easier.

Chasing_The_RAC_Pic_By_CianDon (46)

Jumping back in, it felt like we hadn’t been apart. My feet immediately reset to the incredibly offset pedal locations, the deft throw of gearshift no more than muscle memory, and the familiar urgency of the rev-happy lump upfront had turbo boost instantly expelled from my mind.

There was one issue though – the 106’s NCT (National Car Test) cert had lapsed.

Chasing_The_RAC_Pic_By_CianDon (33)

Being legal was somewhat important given I had a lot of driving ahead of me, but looking into online bookings, the wait time for this annual road worthiness test – similar to the UK’s MOT, Japan’s shaken or Germany’s TUV – was six weeks.

In an amazing twist of fate though, a cancellation appeared for Tuesday morning, a mere 14 hours before I was due to leave on a ferry. This was last minute to the extreme, but I had faith in the little Rallye. After a somewhat tense 40-minute outside the test centre, it emerged with a ‘thumbs up’ from the tester and a new cert sitting on the passenger seat. Happy days.

Chasing_The_RAC_Pic_By_CianDon (66)

Home from work and everything needed packed into the boot, the back seat and footwells of the little Peugeot, I had enough time for about four hours of rest, although that was mostly spent thinking about what I’d forgotten.

My alarm went off at 1:15am and I was on the road 15 minutes later, albeit with the 106’s engine running at a higher-than-normal idle.

From home to the ferry in Belfast took just over four hours, the only talking point being an incredibly thick blanket of fog for the first 90 minutes. Prior to crossing over into Northern Ireland was a chance to fill the Peugeot’s fuel tank and grab some pancakes for breakfast.

Dashboard dining at five in the morning isn’t all that flash, but it sure hit the spot.

Chasing_The_RAC_Pic_By_CianDon (4)

I arrived at the ferry terminal with plenty of time to spare, which isn’t something I do often. Blanket? Check. Netflix? Check. For a man who forgot to put a spare wheel in the car, I had my priorities in the right place.

Chasing_The_RAC_Pic_By_CianDon (7)

Driving onto a ferry is always a rather fun experience, and while I might not have all the ro-ro facts like Ben and Ryan did with their recent trip to Ireland for 86 Fest, I can tell you that Stena Line to Cairnryan do serve a very fine breakfast and have a very comfy lounge.

Chasing_The_RAC_Pic_By_CianDon (10)
Chasing_The_RAC_Pic_By_CianDon (11)

I arrived in Scotland to weather that had turned. Rain and cold – for my first ever time in the country, it felt apt. I don’t think I’d have liked it any other way to be honest.

Thankfully, it was nicer a few days later when border-hopping again to grab that all-important ‘car in front of country sign’ photograph.

Chasing_The_RAC_Pic_By_CianDon (12)

The one thing I wasn’t expecting was the incredible filth spraying off the near constant line of HGVs as I made my two-hour trip east towards the English border and onto Carlisle. By the time I stopped for fuel outside Gretna, the poor 106 was properly blackened, but deep down I thought it just looked proper.

I’ve said it before, but the Rallye is a car that looks equally great whether it’s polished or filthy.

The real MVP on day one was my Sennheiser headphones and a stack of downloaded podcasts. Throughout the week, this pairing was called upon during long drives, although occasionally there was time for some period correct ‘dodgy’ music. Because as great as the diminutive Peugeot is, cruising alone at motorway speed (which equates to almost 5,000rpm) can get a bit wearisome, although the deceptively-comfortable seating position really helps.

I made it to the RAC scrutineering, took and few pictures and collected my media accreditation – so far, so good. After dropping my bags to the hotel, I grabbed a bit of lunch and the headed back to the rally base for some more snaps. Again, no problems.

It felt like nothing could go wrong. Until it did.

Chasing_The_RAC_Pic_By_CianDon (77)

Heading home, the Peugeot lost all battery power and ended up stranded in a dark lane. It didn’t take long to diagnose the problem – an empty space where the alternator belt should have been. Clearly it’d had enough and exited somewhere along the road.

It was the first night of my week-long adventure and my 106 was already on the back of a recovery truck. Thankfully, I’d signed up to the AA Breakdown service before leaving, so maybe I was prepared after all.

Chasing_The_RAC_Pic_By_CianDon (68)

The next morning, with a fresh battery from an absolute legend of a roadside tech named Rob – a fellow rally man – we got the 106 to a nearby parts supplier. £5.20 for a new belt, fitted right there outside the door by Rob, and I was good to go.

A little over an hour after the 106 came off the axle stand I was parked in a forest in Kielder.

Rally Mode

Chasing_The_RAC_Pic_By_CianDon (76)

Over the next few days, the routine went like this: Get back to the hotel, throw the rally map out on the bed and figure out where the entrance to any given special stage was. Once pinpointed, I’d throw it into the phone and save it, then memorise the first car due time and work from there. Adding time for travel and a need to get there early to avoid too much of a walk (I know how precious that sounds, but remember I’d be laden down with cameras and gear), I’d end up with a rough estimate of my wake-up time for the next morning. It always seemed to be 6:30am.

Chasing_The_RAC_Pic_By_CianDon (54)

Arriving earlier on a stage allowed me to take a walk around and get an idea of good shooting locations, and just enjoy the peace and quiet of a forest in the early morning sunshine ahead of a frantic day.

It was also a chance to get in and set up things like remote flashes ahead of the first competing cars.

Chasing_The_RAC_Pic_By_CianDon (19)

The Rallye also doubled as a mobile office for the week. Stage shot, I’d grab my laptop and download my images. This is handy to keep memory card space free on the cameras, but also to get a few images quickly edited for social media. Although, the second part was a rather fruitless exercise given I barely had any mobile reception out on the rally route.

Chasing_The_RAC_Pic_By_CianDon (74)

As the days past, I only grew fonder of my 106. Laden with soggy jackets and muddy boots, it climbed hill after gravelly hill through the woods to the stage-side car parks – generally openings on wider off-road tracks that were often icy. Most of the vehicles were vans and SUVs, but a few hardy souls followed the ‘not in its natural environment’ approach.

From that first night blip, the Peugeot never missed a beat. Even the high idle rectified itself quite early on, a sure sign that the 1,300cc 8V just needed driving.

Chasing_The_RAC_Pic_By_CianDon (25)

As you may know from my RAC story, weather-wise, Friday evening was downright terrifying. I tend to sit low and reasonably far from the wheel of a car, but on this occasion I was nearly bolt upright, seat slid forward with two rather white-knuckled hands gripping the steering wheel.

Chasing_The_RAC_Pic_By_CianDon (26)

Storm Arwen had struck, and having left the final stage of the day amidst a snow blizzard, I’ll never forget the drive back to Carlisle. Pitch black, the admittedly poor lights of the 106 were no match for the oncoming deluge of snow. Reduced to dipped beams and at times park lights, the road became an invisible labyrinth of standing water and was only defined by the white lines visible in places. Every few miles there was a tree or debris to swerve around, one hazard in particular appearing quite suddenly on the outside of a crested corner.

It took two gruelling hours to get back to the hotel when Google Maps had advised 53 minutes.

Chasing_The_RAC_Pic_By_CianDon (27)

Stages were cancelled the following day, providing an opportunity to do some unplanned exploring. I’d seen pictures of the Lake District and it looked like perfect 106 Rallye territory, so I grabbed a coffee and headed 90 minutes north.

Chasing_The_RAC_Pic_By_CianDon (35)

Cockermouth to Keswick via the Honister Pass is one of the most spectacular drives I’ve ever done, helped in part by a lack of traffic on this crisp winter afternoon. The fabled allure of the great British B-road was living up to its stature, and mile after mile the 106 sang to its heart’s content. Naturally though, I had to add some spice to the situation.

When I’d seen the Lake District in pictures, it was launch photos of the 2017 Ford Fiesta WRC on the Honister. What I hadn’t done was research, and didn’t know it was both extremely steep, reaching 1,167ft at a 1-in-4 gradient, and extremely prone to ice. So, yes, it was mega, except for the terrifying descent. If I had crashed, at least the scenery was nice.

Chasing_The_RAC_Pic_By_CianDon (78)

As the Roger Albert Clark rally headed south to Wales, so did I. This drive from Carlisle to Snowdonia was the second longest stint of the trip, but the 106 ate it up. Sure, it may be tiny amongst modern traffic and a wee bit unrefined, but it’s fun. There are no modern frills, but that allows a chance to think, to plan and to take in the sights of the road.

Making a quick fuel stop with 106 miles to go was most definitely not planned.

Chasing_The_RAC_Pic_By_CianDon (43)
Chasing_The_RAC_Pic_By_CianDon (49)

One thing I’ve come to learn about the Rallye is that it’s a welcoming car. People pass compliment, take pictures and want to chat, in a way perhaps I wouldn’t have got with the Hyundai or something modern. During a stop to take photos on the way to Dyfnant, a group of off-roading Land Rovers pulled in, and within minutes we were all chatting and checking out each other’s vehicles.

Chasing_The_RAC_Pic_By_CianDon (20)

The last few days in Wales were flat out. There were early mornings, late evenings and plenty of miles in between, but ultimately, I knew there was a ferry leaving Fishgaurd at 1:00pm on Monday that I intended to be on. That gave me a pretty firm cut off of 10:00am leaving Walters Arena, yet here I was at 10.15am admiring my little Rallye. Welsh mud, rolling hills and a dirty Peugeot 106 isn’t everyone’s dream view, but it is mine.

Chasing_The_RAC_Pic_By_CianDon (60)

The drive to the ferry was frantic as expected, and I arrived with a whole six minutes to spare. Boarded and settled in the lounge, it felt great that the Rallye and I had made it to the end, even if another three hours lay ahead from Rosslare to home.

Chasing_The_RAC_Pic_By_CianDon (36)

When you ask what some of us are doing with our SH Garage cars, well, I’m mainly just driving mine. The Rallye is outside the window as I speak, and I now feel torn about whether to put it into winter storage or not. Over six days, across five countries and clocking up 2,450km (1,520mi), we both had an adventure of a lifetime.

Cian Donnellan
Instagram: Ciandon
Facebook: CianDonPhotography

 

ADVERTISEMENT

 

 

OFFICIAL SPEEDHUNTERS SUPPLIERS

 

 

 

Team Speedhunters

Editorial Director:
Brad Lord
Commercial Director: Ben Chandler
Creative Director: Mark Riccioni
Contributing Editor:
Dino Dalle Carbonare
Technical Editor: Ryan Stewart
Contributors: Will Beaumont, Keiron Berndt, Jordan Butters, Ron Celestine, Mario Christou, Cian Donnellan, Matthew Everingham, Chaydon Ford, Blake Jones, Stefan Kotze, Vladimir Ljadov, Paddy McGrath, Brandon Miller, Rick Muda, Yaheem Murph, Sara Ryan, Trevor Yale Ryan, Dave Thomas, Toby Thyer, Simon Woolley, Naveed Yousufzai

 


For GREAT deals on a new or used INFINITI check out INFINITI of South Bay TODAY!

Burn Your Rulebook: Meet The Half11

<!–

Burn Your Rulebook: Meet The Half11 – Speedhunters



Burn Your Rulebook: Meet The Half11

Given our track record, it’s probably a little hard to believe that Keiron and I don’t intentionally seek out projects that provoke knee-jerk reactions. However, I promise you there is no ‘trigger’ pay packet bonus here at Speedhunters. If there was, both of our projects would probably be further along.

While I’m being honest, as much I’m becoming accustom to expecting the unexpected with Keiron’s photoshoots, his curve balls seem to be getting wilder with each pitch. Seeing an eyeless Porsche staring back at me from within this photoset, ‘Here we go again…’ was about all I could say before getting down to business.

Oilstain Half11 - Speedhunters - Keiron Berndt - Let's Be Friends-1133

Considering the photos breaking up these paragraphs, I’ll grant you skepticism regarding our unintentional, yet continuous sparking of powder kegs. Kyle’s Mustang, Live To Offend’s E30 and Mike’s K-powered Ferrari – these are all builds that have veered from paths previously considered acceptable.

Oilstain Half11 - Speedhunters - Keiron Berndt - Let's Be Friends-1658

The appropriately-named ‘Half11′ is no less of a departure from roads well-travelled. A Porsche 911 carved up more than a festive Turkey might seem like sacrilege for social media’s sake, but this car is actually a homage to motorsport of the 1960s and ’70s – an era its designers view as one of the most romantic.

Oilstain Half11 - Speedhunters - Keiron Berndt - Let's Be Friends-1100

To better explain how and why this car is a homage rather than a desecration, I first need to better introduce the parties involved.

Oil-Filled Pens

Oilstain Half11 - Speedhunters - Keiron Berndt - Let's Be Friends-1760

Oil Stain Lab is the creative umbrella under which twin brothers Iliya and Nikita Bridan operate. The Ukrainian-born, Canadian-raised and Italian-educated siblings have found home in California. Neither brother grew up with a wrench in their hand, a point worth noting before proceeding with this article. The Half11 project is as much a design experiment as it is a real-world vehicle.

“We (mostly) drew cars and dinosaurs as kids… it’s much easier to design cars as profession than it is dinosaurs,” Nikita explained, before quickly adding “unless you work for a film studio”.

Oilstain Half11 - Speedhunters - Keiron Berndt - Let's Be Friends-3670

After formal education, both Iliya and Nikita went through several rounds of on-the-job training. Individually, they have built names for themselves by being incredibly methodical with their design approach. Typically working for companies with at least a tangential connection to cars, they are as capable designing quarter panels as they are advertising panels.

In a designer’s 9-5 (rarely does such a thing exist) they are challenged to deliver clients’ needs, even when those needs are radically unclear.

Oilstain Half11 - Speedhunters - Keiron Berndt - Let's Be Friends-3601

Client work has made Iliya and Nikita’s skin incredibly thick when it comes to criticism. So, comparatively any negative feedback the Half11 has received online has simply been regarded as par for the course.

Both are thankful that their day jobs keep them very busy. The fruits of their labor have also allowed them the resources necessary to play with cars in their limited ‘down’ time.

Oilstain - SH - 22 - 7 - 2020 - Keiron Berndt-3583

That time between client emails and personal commitments is where Oil Stain Lab was born. It has always existed to be an escape, and as a result there’s never been a reason to compromise or play things safe.

Therefore, a 911 with an F1 car shoved up its rear end seems like a perfectly reasonable idea.

Crass aside, before we get to the nuts and bolts, I feel it worthwhile to mention again that this is a fun project for the Bridan brothers.

Oilstain Half11 - Speedhunters - Keiron Berndt - Let's Be Friends-3613

Their tongue and cheek approach to the build as a whole is evident via the IKEA-themed ad above. Could you imagine an IKEA-produced car? Hopefully they’d add a bit more length to those damn Allen wrenches.

Oilstain Half11 - Speedhunters - Keiron Berndt - Let's Be Friends-3624

Oil Stain Lab has extended their imagination to a robust ‘alternate history’ of the Half11’s conception too.

Oilstain Half11 - Speedhunters - Keiron Berndt - Let's Be Friends-3697

“The ‘alternate history’ images have actually upset people the most,” Nikita explained. Simply put, some self-proclaimed Porsche ‘experts’ have become wildly upset to learn this car never raced historically, nor was it ever experimented with in secret, despite images that suggest it may have.

Oilstain Half11 - Speedhunters - Keiron Berndt - Let's Be Friends-3689

I have not waded through all the comments on Oil Stain Lab’s social media accounts, but one can only imagine the confusion among Porsche enthusiasts when they realize they’ve been subject to a deep fake. It’s one of the more clever ways I’ve seen a company build project buzz in some time.

Oilstain Half11 - Speedhunters - Keiron Berndt - Let's Be Friends-3632

For the Bridans, rooting their project in the aesthetic of the 1960s and 1970s has really helped ground it. “Racing in the ’60s and ’70s was the peak era for many enthusiasts,” said Nikita as he described his passion for motorsport designs of that time period.

Oilstain Half11 - Speedhunters - Keiron Berndt - Let's Be Friends-3665

As someone that’s never been much more than a casual motorsports fan, I must agree with Nikita’s assessment. That era is particularly enticing simply because it’s so stripped down. The raw pursuit of speed and comparatively rudimentary understanding of vehicle design and aerodynamics led to some of the most creative and celebrated vehicles in motorsport history. Adding to that, these cars were piloted by true gladiators with unique personalities.

Oilstain Half11 - Speedhunters - Keiron Berndt - Let's Be Friends-3629

From a purely fandom perspective, it then makes perfect sense that a model of a Tyrrell P34 wheel sits in the studio.

oil-stain-6-wheeler

It also makes sense that a six-wheeled version of the Half11 also exists within Oil Stain Lab’s alternate timeline.

That’s Cool, But Is The Half11?

Oilstain - SH - 22 - 7 - 2020 - Keiron Berndt-1199(1)

The Half11 is the progression of what the Bridans call a small collection of hot-rodded 911s. Having done your typical purist – and a few non-purist – modifications, they wanted to make a drastic departure from ‘standard Porsche’.

Oilstain Half11 - Speedhunters - Keiron Berndt - Let's Be Friends-1013

A car that simply looked different wouldn’t be enough, however. It had to be uniquely engineered as well.

Naturally, the project was approached in a way that mirrored Iliya and Nikita’s professional endeavors. With design language rapidly developing thanks to their alternate history, sketches hit the table at a fever pace. During this process, the brothers occupied both ends of the boardroom table, as the clients and also as the agency.

Oilstain Half11 - Speedhunters - Keiron Berndt - Let's Be Friends-1100

When I asked if the pair learned to fabricate as part of the Half11 process, Nikita explained that despite having an extensive interest in automobiles, their hands-on experience started rather late. “I didn’t learn to drive stick until 25, and hadn’t done an oil change until about then either. So no, we didn’t do the heavy fabrication.”

Joe Scarbo from Scarbo Performance took the brothers’ original drawings and turned them into functional designs using SolidWorks software. From there, Joe got to work creating the chassis in DOM tubing and the suspension components in heat-treated 4130 chromoly.

Oilstain Half11 - Speedhunters - Keiron Berndt - Let's Be Friends-0929

Joe is one of a handful of wonderfully talented people that have been roped into this car’s construction. During the design process, he ensured the chassis would work as people would both expect and demand it to. In particular, keeping the car to the overall height the design called for has proven quite the challenge. As a point of reference, the dash has been lowered roughly 2.25-inches from where it originally sat in the 911.

Oilstain Half11 - Speedhunters - Keiron Berndt - Let's Be Friends-1052

The goal all said and done, is a vehicle that is about the height of a Ford GT40. In person, the Half11 has a huge presence, despite actually being rather small.

Oilstain Half11 - Speedhunters - Keiron Berndt - Let's Be Friends-1111

Driveline angles become problematic the more you squish a car and Joe spent considerable time in this area making it all work.

A lot of care went into reworking and redeveloping ideas without changing the overall aesthetic. Today, the engine sits as low as it physically can while retaining drivability.

Oilstain Half11 - Speedhunters - Keiron Berndt - Let's Be Friends-1686

On the topic of engines, yes, that is indeed a Chevrolet JMS Racing LS-based V8 mated to a GT2 996 gearbox. Is a pushrod V8 the most creative power plant? Perhaps not, but with so many irons on the fire, shoehorning in a German-built V8 or a turbo air-cooled motor is something that can come later.

The de-stroked V8, complete with ITBs and a wild exhaust, should still sound pretty exotic from deep within the back of this car.

‘Inspired By’

Oilstain Half11 - Speedhunters - Keiron Berndt - Let's Be Friends-1449

Joining Joe in the hands-on department is metal fabricator Jake Krotje. Jake, or ‘The Flying Dutchman’ as he’s often known, is the metal madman that constructed the ‘911’ out of aluminum. This project did start with a VIN-equipped chassis (this will aid in street registration later), but very little of that core remains today.

Oilstain Half11 - Speedhunters - Keiron Berndt - Let's Be Friends-1458

Similar to Singer creations and builds of similar nature, this Half11 can be viewed as a re-imagination.

Oilstain Half11 - Speedhunters - Keiron Berndt - Let's Be Friends-1428

It’s a small wrinkle the brothers have to consider when marketing the project, as they do plan on producing them as a boutique vehicle. With a company motto that reads ‘We Live For Creating Dreams’ it only makes sense they start with their own.

Oilstain Half11 - Speedhunters - Keiron Berndt - Let's Be Friends-1394

But, let’s not put carts before horses here – there is still a huge amount of work to be done before the Half11 is ready to be manufactured beyond this prototype.

Oilstain Half11 - Speedhunters - Keiron Berndt - Let's Be Friends-1640

Much of what you see in the various renders has become reality using modern production methods. The very intricate exhaust for example has been printed with Inconel powder – cutting-edge tech for a vehicle with its roots in the past.

Oilstain Half11 - Speedhunters - Keiron Berndt - Let's Be Friends-3686

Since these photos, the Half11 was taken to Riley Stair, another individual whose name is closely associated with a number of outlandish builds. Riley handled the final wiring and plumbing of the car.

What’s Next?

Oilstain Half11 - Speedhunters - Keiron Berndt - Let's Be Friends-1261

At this point, the natural question would be what’s next for the project? This is where things get interesting. The car pictured will always belong to the Bridan brothers. It’s a test mule, so it will continue to exist in somewhat of a fluid state.

Oilstain Half11 - Speedhunters - Keiron Berndt - Let's Be Friends-1001

Will the production cars, if produced, have the same dampers, wheels and hand-cut slicks? Maybe, maybe not.

The same question can be asked of the engine. Switching to a more exotic powerplant – which is something many have called for – would suit the wild nature of the design, but would also require reworking the back half of the chassis.

Oilstain Half11 - Speedhunters - Keiron Berndt - Let's Be Friends-1145

At that point, if things are to be extended, then perhaps the wheel diameter would need to be upsized to handle the new elongated footprint. This plays with the visuals of the final result, so it’s currently low on the list of items to be addressed.

The future is uncertain for most things, and most definitely the Half11.

Oilstain Half11 - Speedhunters - Keiron Berndt - Let's Be Friends-1223

By the time you read this, the car will have completed its very first track day at Buttonwillow Raceway Park. Provided all went well and the Half11 doesn’t come back down to the studs, we hope to catch up with it again in the future for an in-depth feature.

Until then, enjoy the madness in the gallery below and follow the build on Oil Stain Lab’s Instagram.

Dave Thomas 
Instagram: stanceiseverythingcom

Photos by Keiron Berndt
Instagram: keiron_berndt

Cutting Room Floor

Oilstain Half11 - Speedhunters - Keiron Berndt - Let's Be Friends-1675
Oilstain Half11 - Speedhunters - Keiron Berndt - Let's Be Friends-0955
Oilstain Half11 - Speedhunters - Keiron Berndt - Let's Be Friends-1016
Oilstain Half11 - Speedhunters - Keiron Berndt - Let's Be Friends-1029
Oilstain Half11 - Speedhunters - Keiron Berndt - Let's Be Friends-1046
Oilstain Half11 - Speedhunters - Keiron Berndt - Let's Be Friends-1066
Oilstain Half11 - Speedhunters - Keiron Berndt - Let's Be Friends-1069
Oilstain Half11 - Speedhunters - Keiron Berndt - Let's Be Friends-1088
Oilstain Half11 - Speedhunters - Keiron Berndt - Let's Be Friends-1115
Oilstain Half11 - Speedhunters - Keiron Berndt - Let's Be Friends-1183
Oilstain Half11 - Speedhunters - Keiron Berndt - Let's Be Friends-1232
Oilstain Half11 - Speedhunters - Keiron Berndt - Let's Be Friends-1368
Oilstain Half11 - Speedhunters - Keiron Berndt - Let's Be Friends-1352
Oilstain Half11 - Speedhunters - Keiron Berndt - Let's Be Friends-1347
Oilstain Half11 - Speedhunters - Keiron Berndt - Let's Be Friends-1478
Oilstain Half11 - Speedhunters - Keiron Berndt - Let's Be Friends-3617
Oilstain Half11 - Speedhunters - Keiron Berndt - Let's Be Friends-3627
Oilstain Half11 - Speedhunters - Keiron Berndt - Let's Be Friends-3705
Oilstain Half11 - Speedhunters - Keiron Berndt - Let's Be Friends-3750
Oilstain Half11 - Speedhunters - Keiron Berndt - Let's Be Friends-3763
Oilstain Half11 - Speedhunters - Keiron Berndt - Let's Be Friends-3769
Oilstain Half11 - Speedhunters - Keiron Berndt - Let's Be Friends-3785
Oilstain Half11 - Speedhunters - Keiron Berndt - Let's Be Friends-1680

ADVERTISEMENT

OFFICIAL SPEEDHUNTERS SUPPLIERS

Team Speedhunters

Editorial Director:
Brad Lord
Commercial Director: Ben Chandler
Creative Director: Mark Riccioni
Contributing Editor:
Dino Dalle Carbonare
Technical Editor: Ryan Stewart
Contributors: Will Beaumont, Keiron Berndt, Jordan Butters, Ron Celestine, Mario Christou, Cian Donnellan, Matthew Everingham, Blake Jones, Stefan Kotze, Vladimir Ljadov, Paddy McGrath, Brandon Miller, Rick Muda, Yaheem Murph, Sara Ryan, Trevor Yale Ryan, Dave Thomas, Toby Thyer, Simon Woolley, Naveed Yousufzai


Aston Martin Nails The SUV

<!–

Aston Martin Nails The SUV – Speedhunters



Aston Martin Nails The SUV

It’s time for another instalment in my slightly unconventional series of luxury SUV drive stories, and following on from my recent Rolls-Royce Cullinan feature we have another submission from the UK.

This time, however, there is definitely a bit more ‘sport’ in it all. A mix of class and performance that Aston Martin does very well.

aston_martin_dbx_dino_dalle_carbonare_01

To me, Aston Martin has always been amongst the best at mixing an upper-class feel with just the right amount of power, but when the automaker announced it was launching an SUV, there was only one thought that came to mind…

aston_martin_dbx_dino_dalle_carbonare_02

‘Here we go again… a sports car manufacturer selling out and trying to win over a slice of the lucrative ‘truck’ market.’ Porsche, Lamborghini and Maserati have all done it, and so to will Ferrari and Lotus soon. But really, what’s the harm? Is it wrong?

aston_martin_dbx_dino_dalle_carbonare_03

Initially, I was a little horrified at the prospect, however, if like Porsche with the Cayenne, Aston Martin’s SUV ends up being so profitable that the company can continue to develop proper sports cars well into the future, well, how could you possibly be against it?

aston_martin_dbx_dino_dalle_carbonare_04

Then I saw the DBX and my whole outlook changed – and not for the worse. It looked sensational in pictures.

For the first time, I remember thinking here’s an SUV that actually has all the right proportions. Most SUVs have a slightly awkward look about them, but the Aston Martin DBX does not.

Setting The Stage

aston_martin_dbx_dino_dalle_carbonare_06

This said, I was rather excited when offered an opportunity to drive one for a weekend. And the DBX looked even better in person with its glossy black exterior and gigantic 22-inch wheels. It was truly menacing.

aston_martin_dbx_dino_dalle_carbonare_07
aston_martin_dbx_dino_dalle_carbonare_11

Exterior design isn’t the only thing that Aston Martin has got so right with the DBX. The way they’ve appointed the interior – which follows recent updates throughout the entire Aston Martin model range – ensured the DBX hit the market with all the features and gadgets you can think of. And given that this thing is priced at the equivalent of US$200K here in Japan, you’d absolutely want it to be fully loaded.

aston_martin_dbx_dino_dalle_carbonare_13

While it ticks all the spec boxes, the DBX looks and feels like no other SUV out there. That’s not something easily achieved in this segment.

aston_martin_dbx_dino_dalle_carbonare_12

I had the DBX parked up for 20 minutes or so on Ginza’s main road while I shot these images, and the number of positive comments I overheard from passersby was quite telling. In Tokyo, reactions like kakkoi (read: cool) are not easy to get, and especially so in upmarket Ginza where exotic and luxury cars aren’t really anything out of the ordinary.

aston_martin_dbx_dino_dalle_carbonare_14

What seals the deal for me is the engine mounted up front – a 545hp ‘hot-vee’ twin-turbo 4.0L V8. We all know that Aston Martin gets its engines from Mercedes-AMG these days, but like in the Vantage that I drove last year, this adds to the experience rather than taking anything away from it. Simply, this is one of the best force-fed production V8s around.

Stick the drive mode into ‘Sport’ and you have an SUV with the soundtrack of an AMG GT that effortlessly machine-guns through its nine gears with immense acceleration from any speed. Despite the DBX’s 2.3-ton heft, it will go from zero to 62mph (100km/h) in 4.5 seconds. Drive it peacefully, and that V8 rumble subsides to a relaxing low-frequency burble.

aston_martin_dbx_dino_dalle_carbonare_17

Underneath its well-executed proportions, the DBX is built on a bespoke platform that like other Aston Martins is constructed with bonded aluminum panels and extrusions. It’s impressively stiff and remarkably throwable around corners given its heft, and thanks to a 48v anti-roll bar system and active dampers, it stays flat through corners at speed. Like all vehicles of this type, the DBX is equipped with air springs, allowing it to sit at different ride heights depending on which of its five drive modes are selected.

aston_martin_dbx_dino_dalle_carbonare_18

Like the engine and transmission, the infotainment system comes from Mercedes-Benz too. It’s not a bad thing – something I touched on in the Vantage post – as I’d rather see lower-volume manufacturers like Aston Martin go this route rather than attempting to build their own systems and completely messing it up. It makes total financial sense too, as modern systems are complex and ever-evolving. What’s in the DBX might be one generation behind the current Mercedes system, but it’s better than an antiquated unit that’s glitchy and frustrating to use.

Beauty On Its Side

aston_martin_dbx_dino_dalle_carbonare_19
aston_martin_dbx_dino_dalle_carbonare_23

If you’re in a position to purchase a high-end SUV, you will be looking for something that checks every box. The DBX would surely come close to doing that.

aston_martin_dbx_dino_dalle_carbonare_25

Such is the pace of innovation and engineering today, you can turn a vehicle that shouldn’t really perform at this sort of level into a package that does.

aston_martin_dbx_dino_dalle_carbonare_26

In fact, that might be the very definition of these vehicles. They’re able to be this good thanks to the decades of development that have gone into camouflaging the fact they’re far too big and heavy to actually be sporty.

aston_martin_dbx_dino_dalle_carbonare_27

The Aston Martin DBX’s party trick is its beautifully proportioned and unique exterior.

aston_martin_dbx_dino_dalle_carbonare_24

It might not be for everyone in the market for this type of vehicle, but it would probably be the perfect choice if you want something that stands out in the sea of high-end SUVs. The fact that the DBX as of this month is already outselling every other model in the Aston Martin line-up speaks volumes about how right they got the concept.

Stay tuned for my next SUV drive, whatever it may be. Any requests?

Dino Dalle Carbonare
Instagram: dino_dalle_carbonare
dino@speedhunters.com

ADVERTISEMENT

OFFICIAL SPEEDHUNTERS SUPPLIERS

Team Speedhunters

Editorial Director:
Brad Lord
Commercial Director: Ben Chandler
Creative Director: Mark Riccioni
Contributing Editor:
Dino Dalle Carbonare
Technical Editor: Ryan Stewart
Contributors: Will Beaumont, Keiron Berndt, Jordan Butters, Ron Celestine, Mario Christou, Cian Donnellan, Matthew Everingham, Chaydon Ford, Blake Jones, Stefan Kotze, Vladimir Ljadov, Paddy McGrath, Brandon Miller, Rick Muda, Yaheem Murph, Sara Ryan, Trevor Yale Ryan, Dave Thomas, Toby Thyer, Simon Woolley, Naveed Yousufzai


For GREAT deals on a new or used Harley check out Death Valley Harley TODAY!

5 Days On The RAC Rally

<!–

5 Days On The RAC Rally – Speedhunters



5 Days On The RAC Rally

Intro

As the snow blizzard grew even more intense, I stood nestled against a sodden bank. Shivering, the flash of light along the treeline and rasp of an exhaust signalled another rally car passing by, but I didn’t look.

I was cold, miserable and tired, and a turn of the head only meant an absolute onslaught of hail to the face.

RAC_Rally_2021_on_Speedhunters_Pic_By_Cian_Donnellan (146)

Rallying in Storm Arwen, an extratropical cyclone that lashed the United Kingdom with gale-force winds, driving rain and snow, teetered on dangerous.

RAC_Rally_2021_on_Speedhunters_Pic_By_Cian_Donnellan (144)

But this was the Roger Albert Clark (RAC) Rally – one of true great rallying adventures left anywhere in the world, so everyone just got on with it (for as long as they possibly could) in an old school motorsport kind of way. And snow in late November was always inevitable, right?

RAC_Rally_2021_on_Speedhunters_Pic_By_Cian_Donnellan (149)

In an age of compact itineraries, the 2021 RAC Rally route bucked the trend by stretching over five days, the competitive special stages alone amounting to 313 miles (504km). That made it 50% longer than Rally Portugal, the longest event on the 2021 World Rally Championship (WRC) calendar.

All in, this was the longest single UK rally event since 1991, and the Lombard RAC of old.

RAC_Rally_2021_on_Speedhunters_Pic_By_Cian_Donnellan (133)

While the ‘original’ RAC has morphed into Rally GB and is a Welsh-based (and hopefully soon to be Northern Irish) round of the WRC, the Roger Albert Clark is a celebration of rallying’s bygone era. Limited in one part to ‘Historic’ cars, those over 35 years old, and 2WD vehicles in the ‘Open’ section, the marathon event is as big a throwback as it is an incredible test of team and machine.

RAC_Rally_2021_on_Speedhunters_Pic_By_Cian_Donnellan (106)

Based in the city of Carlisle, the 2021 RAC would see action in Scotland, England and Wales, with some of the most legendary gravel stages – Kielder, Kershope, Ae, Dyfant and Walters Arena – amongst a 31-stage route plan.

RAC_Rally_2021_on_Speedhunters_Pic_By_Cian_Donnellan (119)

Running since 2004, and a bi-annual affair since 2017, the Roger Albert Clark (itself a celebration of the legendary driver who claimed RAC success in 1972 and 1976) has grown into a monster event, with an oversubscribed entry filling within days of registration. Come the rally start, 139 cars lined up.

For me, the 2021 RAC began at 1.30am on Wednesday.

This event was on my radar for a long time, and with the nature of the current world and the constant swing from restriction to restriction, it was time to just say ‘yes’ when the opportunity arose. I’d sold my Hyundai i30N the previous week, so had some surplus funds to pay for the week-long rally adventure, but that now also meant doing it from behind the wheel of my Peugeot 106 Rallye. I’ll fill you in on that experience in another post.

RAC_Rally_2021_on_Speedhunters_Pic_By_Cian_Donnellan (1)

It was a quiet drive from home to Belfast in the middle of the night. A ferry across to the UK, followed by a wet and wild blast south through Scotland had me arriving during the rally’s frantic scrutineering.

RAC_Rally_2021_on_Speedhunters_Pic_By_Cian_Donnellan (18)
RAC_Rally_2021_on_Speedhunters_Pic_By_Cian_Donnellan (25)
RAC_Rally_2021_on_Speedhunters_Pic_By_Cian_Donnellan (11)

All around, crews were busy completing final checks. Door placards and windscreen banners were being applied and one by one each car was rolled through for inspection.

Behind barriers, the crowds built. Each bonnet popped grabbed attention, a sea of the finest BDAs, Pintos and more on display for the admiring public.

RAC_Rally_2021_on_Speedhunters_Pic_By_Cian_Donnellan (33)
RAC_Rally_2021_on_Speedhunters_Pic_By_Cian_Donnellan (12)

Under the fluorescent lights, everything seemed to look immaculate. Fresh rally car builds, yet to feel the trauma of gravel rash across their underbodies, sat gleaming.

Navigators ran around, some looking more frantic than others, with the required paperwork. There would be a lot of paperwork over the next few days.

Thursday

RAC_Rally_2021_on_Speedhunters_Pic_By_Cian_Donnellan (75)

When Thursday rolled around, all eyes were focused on Kershope and the opening special stages. I arrived 90 minutes before the first car was due, and watched the final strains of daylight drain away over the rolling Cumbrian hills. By 4:00pm, it was near pitch black.

RAC_Rally_2021_on_Speedhunters_Pic_By_Cian_Donnellan (57)
RAC_Rally_2021_on_Speedhunters_Pic_By_Cian_Donnellan (88)

With the sky clear and an array of stars visible in a way not overly familiar to a city dweller like myself, the first exhaust note reverberated through the trees. Game time.

RAC_Rally_2021_on_Speedhunters_Pic_By_Cian_Donnellan (49)

Into a slippy square left with standing water on the inside, drivers desperately needed to scrub off speed from the fast 200m uphill straight before turn in. Mid-corner, an assault of flashlights went off all round. This felt electric on the bank, never mind in the car.

RAC_Rally_2021_on_Speedhunters_Pic_By_Cian_Donnellan (54)

Venturing deeper into the woods as the evening passed, it felt refreshing to be so far from home, making small talk to pass the time before another exhaust note pierced the silence. This was raw, gritty and ever-so-captivating for a rally nerd like myself.

RAC_Rally_2021_on_Speedhunters_Pic_By_Cian_Donnellan (82)

It was 10:00pm in the middle of Kielder when a screaming BDA and the searching beams of four PIAA spots cast out above the trees. Does it really get any better than this?

Friday

After a late Thursday night – the special stages finishing up near 11:00pm – it was an early start on Friday morning. Today, the rally ventured into Scotland, with the crews heading northeast to Kielder, the legendary forests on the Anglo-Scots border.

RAC_Rally_2021_on_Speedhunters_Pic_By_Cian_Donnellan (123)

Known as Killer Kielder, the thick banks and unforgiving lanes have claimed many rallying victims over the years. An onslaught of mud, ditches, ruts, trees and all manner of weather, the area holds almost mythical status in the rally world. In the mid-morning sunshine it seemed tame, although that wouldn’t last.

RAC_Rally_2021_on_Speedhunters_Pic_By_Cian_Donnellan (110)
RAC_Rally_2021_on_Speedhunters_Pic_By_Cian_Donnellan (101)

First on the road each day was the sub-1,600cc class, a real oddball mix of classics. Think everything from Peugeot 205s to Lancia Fulvias, an Opel Corsa S1600 to a Rover 400 BRM and pretty much everything in between.

RAC_Rally_2021_on_Speedhunters_Pic_By_Cian_Donnellan (105)
RAC_Rally_2021_on_Speedhunters_Pic_By_Cian_Donnellan (122)

Cutting a swift path uphill through two tree-lined banks, it felt serene from a distance, but Friday was a test in the truest sense of the word. Eight special stages covering 170.1km (105.7mi) – that’s almost the equivalent of three Irish forestry events, but in one single day.

RAC_Rally_2021_on_Speedhunters_Pic_By_Cian_Donnellan (204)

Keeping cars running for such a long and challenging event is a huge logistical task. Like the old days, pop-up remote service parks were a daily occurrence, while the end of every stage was lined for miles by chase and management crews. Some opted for full service-like ground sheets, while others made do with grassy roadside banks.

RAC_Rally_2021_on_Speedhunters_Pic_By_Cian_Donnellan (141)

As the daylight began to fade, I shot across to another stage. It was here, as I made the slow climb down a bumpy forest track to the parking area, that the first wistful snowflakes began to appear. The forecast did say snow at 4:00pm; they arrived at 3.57pm. Oh joy.

RAC_Rally_2021_on_Speedhunters_Pic_By_Cian_Donnellan (145)

I’d only ever experienced a whiteout once before on a rally, but this was different. A cutting wind whipped the damp drifts of precipitation into a frenzy, falling more erratically than the picture-postcard style winter wonderland. It didn’t settle, and drivers became extra cautious, especially through the sections requiring more commitment.

It would be but a warning. Here, on the Chirdonhead special stage, I don’t think anyone knew what lay ahead.

SS12: Bewshaugh 2 is a special stage I will never forget. It was the same location as earlier, but with just a slight change in conditions.

RAC_Rally_2021_on_Speedhunters_Pic_By_Cian_Donnellan (147)

As I mentioned at the beginning of this story, Storm Arwen absolutely battered the area. Amazingly though, the banks remained lined with spectators.

In a forest, at night, in blizzard conditions, we stood. Masochists maybe, but this felt authentic. This was proper RAC weather, like ’73, ’93 or ’96.

RAC_Rally_2021_on_Speedhunters_Pic_By_Cian_Donnellan (150)

I must admit though, it was not a pleasant experience. The gloves I wore lost badly to the damp quite early on, and my camera began to act up after 25 minutes. I lasted about an hour, which was enough time to see the leading 10 cars. I still had to make it back to my hotel though, and the 65-minute B-road blast in the morning ended up being a near 2.5-hour nerve-racking return ordeal.

Gale-force winds whipped across the road from all directions and the lashing snow and rain reduced visibility almost down to zero. After negotiating mile after mile of standing water and avoiding fallen trees on the road, I was relieved to arrive back in Carlisle. Others weren’t so lucky.

In the woods, mobile phone signal is nonexistent, so most of the time I lived a life disconnected from the rest of the world (again in keeping with the original RAC fantasy). It wasn’t until the next morning that I began to learn of the ongoing situation. The special stage I had been on, Bewshaugh 2, was eventually cancelled. Safety was the priority and it was getting pretty clear things weren’t great. The teams still waiting on the start line – roughly 20 of them – thought the cancellation would be the end of their night, but it turned out to be the beginning of another challenge.

Completely blocked roads meant many teams, rally officials and spectators had resigned themselves to sleeping in their vehicles. A small reprieve came when a local pub opened its doors to provide shelter for some.

Saturday & Sunday

RAC_Rally_2021_on_Speedhunters_Pic_By_Cian_Donnellan (158)

It was near midday on Saturday when some crews returned to Carlisle, but by then a call had been made to abandon the day’s rallying.

Disappointed to now be heading north to Ae, crews got to work fixing the Kielder damage before loading up for an earlier-than-expected trip down the M6 towards Wales. I went off on a day trip to the Lake District, before eventually packing up and heading south as well.

RAC_Rally_2021_on_Speedhunters_Pic_By_Cian_Donnellan (164)
RAC_Rally_2021_on_Speedhunters_Pic_By_Cian_Donnellan (172)

Next morning, with the sun shining, Welsh rally fans came out in numbers. Well-known terrain for many, the roadside car park at Dyfnant stretched for nearly 2.5 miles.

Bobble hats teetered happily in a breeze tinged with log-fire smoke and the rich aroma of fried sausages. Anyone who’s been to Wales Rally GB in recent years knows the scene, but there were no WRC monsters to be seen on this day.

RAC_Rally_2021_on_Speedhunters_Pic_By_Cian_Donnellan (182)

The RAC is, to be truthful, an absolute festival of Ford Escorts. Of the 139 starters, 95 were either Mk1s or Mk2s. The leaderboard heading to Wales was chock-full of BDA-powered Fords, with Jason Pritchard and Phil Clark holding the start in their newly-built Scott Williams car.

Behind, the chasing pack was led by the hard-charging Osian Pryce and Noel O’Sullivan, themselves bouncing back from BRC heartbreak in their VW Polo R5 the week before, and the more experienced combination of Paul Barrett and Gordon Noble.

RAC_Rally_2021_on_Speedhunters_Pic_By_Cian_Donnellan (185)

The crowds stretched two, sometimes three-deep for hundreds of metres out of the big junctions. The ground, frozen solid in places, proved to be a real challenge for some drivers.

RAC_Rally_2021_on_Speedhunters_Pic_By_Cian_Donnellan (197)
RAC_Rally_2021_on_Speedhunters_Pic_By_Cian_Donnellan (167)

Over time, the ideal driving line became clear: Scandinavian flick, run the rear end wide and put the power down in an attempt to get back into a straight line as quickly as possible. It’s just the most timeless and pure driving style on gravel, and save for the odd interloper, you’d be forgiven for thinking this was 1978. Oh, and the noise. Dear god, the noise.

RAC_Rally_2021_on_Speedhunters_Pic_By_Cian_Donnellan (194)

Such is the layout in Dyfant, the roars of screaming BDA engines lingered for three, maybe even four minutes before the Escorts they powered emerged into sight, sideways of course.

RAC_Rally_2021_on_Speedhunters_Pic_By_Cian_Donnellan (203)

With the massive crowds, it became clear that grabbing a second stage would be a challenge, so instead I took the chance to dive into Dolgellau to catch the ‘midday service’. That name was misleading given how dark it was by the time the lead cars arrived.

Quickly, the quiet, organised awnings became hives of activity. Fresh tyres, more fuel and a cleaning rag was standard, while other team mechanics wheeled out welders and big hammers to keep their machines going.

RAC_Rally_2021_on_Speedhunters_Pic_By_Cian_Donnellan (200)
RAC_Rally_2021_on_Speedhunters_Pic_By_Cian_Donnellan (211)

In the air, the mood was of disbelief – event leader Jason Pritchard had gone off, thrusting Paul Barrett into the lead. Osian Pryce was pulling time with every passing stage, but the real talk was the Porsche-shaped imposter now on the podium.

RAC_Rally_2021_on_Speedhunters_Pic_By_Cian_Donnellan (115)

Ryan Champion and Craig Thorley had led a quiet life on the event, keeping out of the Escort battle at the front in their Tuthill-built Porsche 911. No mechanical issues, just all under control – it would prove a wise strategy later on.

Someone not having such an easy ride of things was Chris Harris. A true ‘one of us’ journalist (any man with a taste for French tat and German performance metal is proper hero status) and Top Gear presenter, his RAC had been eventful. Harris slid off the road and got stuck in a ditch on the opening night, and ended up as one of the Storm Arwen-stricken crews the next. By the time the event hit Wales, Chris had had quite a ride, but credit where it’s due because he got to the end. Not even a dashboard fire could stop him.

RAC_Rally_2021_on_Speedhunters_Pic_By_Cian_Donnellan (213)

As the night dragged on and the leading cars headed off into the forests once more, I headed south. Four long days was starting to wear me down, but at least I had a warm room to look forward to. Many bedded down for the night in cars and vans parked up in woods and lay-bys, so it almost felt like I was cheating.

Monday

RAC_Rally_2021_on_Speedhunters_Pic_By_Cian_Donnellan (220)

The bitterly cold final morning began in South Wales. Just outside Neath, Walters Arena is another name carved into rally lore, and I made it stage-side for sunrise. The arena has become a go-to location for rally car testing and off-road pursuits, so it was a perfect place to finish off my RAC experience. While the event would stretch into the dying light of the fifth day, I had to make do with a single stage before a brisk drive to the port.

RAC_Rally_2021_on_Speedhunters_Pic_By_Cian_Donnellan (24)

Watching nature put on its stunning morning show gave me time to stop and think about the mammoth effort that goes into organising and running a rally like this. Any event is a huge task, but to do it on this scale is crazy. The team at DeLacy MC usually have two years to organise the RAC, but Covid gave them less than six months. It explains the frantic running needed at times.

RAC_Rally_2021_on_Speedhunters_Pic_By_Cian_Donnellan (222)

Against the wide expanses of the rolling Welsh Hills, the forest tracks criss-crossed in and out of sight below my viewing spot. I had to be tactical; there were likely better spots to seek out, but I knew I had a ferry  to catch at 1:00pm, so discipline and sticking to the plan were the order of the day. That still allowed a bit of moving around and shot variety, and the three images above were all captured within 100m of each other. The ice-hardened hairpin would prove deceptively tricky for some.

RAC_Rally_2021_on_Speedhunters_Pic_By_Cian_Donnellan (223)

In rallying, you always have to expect the unexpected, and within a few miles, on the last day of the marathon, both the first and second-placed teams bowed out of contention. Paul Barrett sent his Escort into a ditch breaking the suspension, while further back in the stage, Osian Pryce suffered a stub axle failure.

RAC_Rally_2021_on_Speedhunters_Pic_By_Cian_Donnellan (242)
RAC_Rally_2021_on_Speedhunters_Pic_By_Cian_Donnellan (186)
RAC_Rally_2021_on_Speedhunters_Pic_By_Cian_Donnellan (114)

That left Ryan Champion and Craig Thorley to cruise home to victory in their Porsche 911 and claim British rallying’s ultimate crown, in doing so breaking a 15-year Ford Escort stranglehold on the Roger Albert Clark Rally title. Not bad for a ‘steady, middle of the road’ drive, but such is the epic nature of the RAC that it proved fruitful.

RAC_Rally_2021_on_Speedhunters_Pic_By_Cian_Donnellan (251)

After six days on the road and nearly 2,000km racked up, I made it to the ferry port with six minutes to spare. The few hours more on the far side felt the longest all week, but that was the post-rally comedown.

Following the RAC was a dream list item ticked off, and it most definitely did not disappoint. Now, about the 106…

Cian Donnellan
Instagram: Ciandon
Facebook: CianDonPhotography

Cutting Room Floor

RAC_Rally_2021_on_Speedhunters_Pic_By_Cian_Donnellan (246)
RAC_Rally_2021_on_Speedhunters_Pic_By_Cian_Donnellan (249)
RAC_Rally_2021_on_Speedhunters_Pic_By_Cian_Donnellan (247)
RAC_Rally_2021_on_Speedhunters_Pic_By_Cian_Donnellan (169)
RAC_Rally_2021_on_Speedhunters_Pic_By_Cian_Donnellan (170)
RAC_Rally_2021_on_Speedhunters_Pic_By_Cian_Donnellan (250)
RAC_Rally_2021_on_Speedhunters_Pic_By_Cian_Donnellan (152)
RAC_Rally_2021_on_Speedhunters_Pic_By_Cian_Donnellan (138)
RAC_Rally_2021_on_Speedhunters_Pic_By_Cian_Donnellan (136)
RAC_Rally_2021_on_Speedhunters_Pic_By_Cian_Donnellan (135)
RAC_Rally_2021_on_Speedhunters_Pic_By_Cian_Donnellan (134)
RAC_Rally_2021_on_Speedhunters_Pic_By_Cian_Donnellan (132)
RAC_Rally_2021_on_Speedhunters_Pic_By_Cian_Donnellan (131)
RAC_Rally_2021_on_Speedhunters_Pic_By_Cian_Donnellan (130)
RAC_Rally_2021_on_Speedhunters_Pic_By_Cian_Donnellan (129)
RAC_Rally_2021_on_Speedhunters_Pic_By_Cian_Donnellan (126)
RAC_Rally_2021_on_Speedhunters_Pic_By_Cian_Donnellan (127)
RAC_Rally_2021_on_Speedhunters_Pic_By_Cian_Donnellan (125)
RAC_Rally_2021_on_Speedhunters_Pic_By_Cian_Donnellan (124)
RAC_Rally_2021_on_Speedhunters_Pic_By_Cian_Donnellan (120)
RAC_Rally_2021_on_Speedhunters_Pic_By_Cian_Donnellan (118)
RAC_Rally_2021_on_Speedhunters_Pic_By_Cian_Donnellan (109)
RAC_Rally_2021_on_Speedhunters_Pic_By_Cian_Donnellan (100)
RAC_Rally_2021_on_Speedhunters_Pic_By_Cian_Donnellan (93)
RAC_Rally_2021_on_Speedhunters_Pic_By_Cian_Donnellan (92)
RAC_Rally_2021_on_Speedhunters_Pic_By_Cian_Donnellan (91)
RAC_Rally_2021_on_Speedhunters_Pic_By_Cian_Donnellan (83)
RAC_Rally_2021_on_Speedhunters_Pic_By_Cian_Donnellan (76)
RAC_Rally_2021_on_Speedhunters_Pic_By_Cian_Donnellan (74)
RAC_Rally_2021_on_Speedhunters_Pic_By_Cian_Donnellan (72)
RAC_Rally_2021_on_Speedhunters_Pic_By_Cian_Donnellan (71)
RAC_Rally_2021_on_Speedhunters_Pic_By_Cian_Donnellan (68)
RAC_Rally_2021_on_Speedhunters_Pic_By_Cian_Donnellan (67)
RAC_Rally_2021_on_Speedhunters_Pic_By_Cian_Donnellan (58)
RAC_Rally_2021_on_Speedhunters_Pic_By_Cian_Donnellan (60)
RAC_Rally_2021_on_Speedhunters_Pic_By_Cian_Donnellan (65)
RAC_Rally_2021_on_Speedhunters_Pic_By_Cian_Donnellan (52)
RAC_Rally_2021_on_Speedhunters_Pic_By_Cian_Donnellan (48)
RAC_Rally_2021_on_Speedhunters_Pic_By_Cian_Donnellan (47)
RAC_Rally_2021_on_Speedhunters_Pic_By_Cian_Donnellan (44)
RAC_Rally_2021_on_Speedhunters_Pic_By_Cian_Donnellan (43)
RAC_Rally_2021_on_Speedhunters_Pic_By_Cian_Donnellan (41)
RAC_Rally_2021_on_Speedhunters_Pic_By_Cian_Donnellan (38)
RAC_Rally_2021_on_Speedhunters_Pic_By_Cian_Donnellan (35)
RAC_Rally_2021_on_Speedhunters_Pic_By_Cian_Donnellan (30)
RAC_Rally_2021_on_Speedhunters_Pic_By_Cian_Donnellan (28)
RAC_Rally_2021_on_Speedhunters_Pic_By_Cian_Donnellan (29)
RAC_Rally_2021_on_Speedhunters_Pic_By_Cian_Donnellan (26)
RAC_Rally_2021_on_Speedhunters_Pic_By_Cian_Donnellan (23)
RAC_Rally_2021_on_Speedhunters_Pic_By_Cian_Donnellan (21)
RAC_Rally_2021_on_Speedhunters_Pic_By_Cian_Donnellan (16)
RAC_Rally_2021_on_Speedhunters_Pic_By_Cian_Donnellan (15)
RAC_Rally_2021_on_Speedhunters_Pic_By_Cian_Donnellan (14)
RAC_Rally_2021_on_Speedhunters_Pic_By_Cian_Donnellan (13)
RAC_Rally_2021_on_Speedhunters_Pic_By_Cian_Donnellan (9)
RAC_Rally_2021_on_Speedhunters_Pic_By_Cian_Donnellan (7)
RAC_Rally_2021_on_Speedhunters_Pic_By_Cian_Donnellan (6)
RAC_Rally_2021_on_Speedhunters_Pic_By_Cian_Donnellan (5)
RAC_Rally_2021_on_Speedhunters_Pic_By_Cian_Donnellan (176)
RAC_Rally_2021_on_Speedhunters_Pic_By_Cian_Donnellan (185)
RAC_Rally_2021_on_Speedhunters_Pic_By_Cian_Donnellan (179)
RAC_Rally_2021_on_Speedhunters_Pic_By_Cian_Donnellan (180)
RAC_Rally_2021_on_Speedhunters_Pic_By_Cian_Donnellan (187)
RAC_Rally_2021_on_Speedhunters_Pic_By_Cian_Donnellan (188)
RAC_Rally_2021_on_Speedhunters_Pic_By_Cian_Donnellan (192)
RAC_Rally_2021_on_Speedhunters_Pic_By_Cian_Donnellan (196)
RAC_Rally_2021_on_Speedhunters_Pic_By_Cian_Donnellan (197)
RAC_Rally_2021_on_Speedhunters_Pic_By_Cian_Donnellan (198)
RAC_Rally_2021_on_Speedhunters_Pic_By_Cian_Donnellan (199)
RAC_Rally_2021_on_Speedhunters_Pic_By_Cian_Donnellan (201)
RAC_Rally_2021_on_Speedhunters_Pic_By_Cian_Donnellan (202)
RAC_Rally_2021_on_Speedhunters_Pic_By_Cian_Donnellan (214)
RAC_Rally_2021_on_Speedhunters_Pic_By_Cian_Donnellan (216)
RAC_Rally_2021_on_Speedhunters_Pic_By_Cian_Donnellan (224)
RAC_Rally_2021_on_Speedhunters_Pic_By_Cian_Donnellan (225)
RAC_Rally_2021_on_Speedhunters_Pic_By_Cian_Donnellan (230)
RAC_Rally_2021_on_Speedhunters_Pic_By_Cian_Donnellan (231)
RAC_Rally_2021_on_Speedhunters_Pic_By_Cian_Donnellan (233)
RAC_Rally_2021_on_Speedhunters_Pic_By_Cian_Donnellan (235)
RAC_Rally_2021_on_Speedhunters_Pic_By_Cian_Donnellan (241)

ADVERTISEMENT

OFFICIAL SPEEDHUNTERS SUPPLIERS

Team Speedhunters

Editorial Director:
Brad Lord
Commercial Director: Ben Chandler
Creative Director: Mark Riccioni
Contributing Editor:
Dino Dalle Carbonare
Technical Editor: Ryan Stewart
Contributors: Will Beaumont, Keiron Berndt, Jordan Butters, Ron Celestine, Mario Christou, Cian Donnellan, Matthew Everingham, Chaydon Ford, Blake Jones, Stefan Kotze, Vladimir Ljadov, Paddy McGrath, Brandon Miller, Rick Muda, Yaheem Murph, Sara Ryan, Trevor Yale Ryan, Dave Thomas, Toby Thyer, Simon Woolley, Naveed Yousufzai


For GREAT deals on a new or used Cadillac check out Crestview Cadillac TODAY!

Project GC8: Taking Care Of Business With ST Suspensions

<!–

Project GC8: Taking Care Of Business With ST Suspensions – Speedhunters



Project GC8: Taking Care Of Business With ST Suspensions

Welcome to another instalment of Fixing Broken Old Japanese Cars On My Driveway.

On today’s episode, we’ll be swapping out a set of old Cusco coilovers for a set of brand-new ST Suspensions XTA items. And because there’s a list of things to do as long as my arm, I’ll be tackling each one individually until Project GC8 – my 1999 Subaru Impreza WRX Type RA 555 Limited – is where I want it to be. Even if that means doing them in a non-traditional order.

I’ve been a Speedhunters contributor for nearly a year now, and in addition to hunting down all the raddest cars (and meeting some fantastic people along the way), it’s also exposed me to some of the coolest products, upgrades and tech available on the market. Which is dangerous when you’re embarking on your own project.

Toby_Thyer_Photographer_Speedhunters-5
Toby_Thyer_Photographer_Speedhunters-6

One of those is ST Suspensions, whose parent company happens to be KW Automotive. And we’re all familiar with the incredible work KW does when it comes to making cars handle infinitely better, be that for road use or motorsport.

How does ST Suspensions fit into this? Well, ST Suspensions are like an entry-level point into KW. They still boast quality and handling improvements, but at a more affordable price for a wide selection of vehicles. Plus, when you’re ready to delve into the world of high-performance or track solutions, you can easily make the jump to KW.

You might remember from a previous update that I took the Impreza on a five-hour road trip up to Nagano recently, so the idea of a 2-way motorsport-specific kit might be slightly wasted on my daily. One thing did stand out from this trip however: the old Cusco coilovers fitted by a previous owner performed as well as they looked. Terrible.

The rebound adjusters were either seized or spinning freely, meaning there was no way to tell what setting they were on. If I had to guess, I’d say the fronts were set for time attack and the rears to try and mimic a Toyota Century. The whole car felt completely different at each corner.

Toby_Thyer_Photographer_Speedhunters-10

Thankfully, ST Suspensions had the perfect solution in the form of their XTA coilover kit. This is one of their top-of-the-range solutions which boasts ride height adjustment and rebound as well as camber-adjustable top mounts. But what made this kit particularly special was the customization ST currently offers on all their coilover kits.

Not only could I choose a custom spring colour, but also a neat little message which would be printed on each spring. Have a little scroll down to see what I went for; it seemed fitting given this particular car and the questions I’m usually asked about it.

Toby_Thyer_Photographer_Speedhunters-11
Toby_Thyer_Photographer_Speedhunters-7

Yup, that’s cherry blossom pink – the iconic STI colour. And a little text to remind myself that this project is very much being built and not bought.

Toby_Thyer_Photographer_Speedhunters-12

Why choose ST over KW in this instance? Well, the ST XTA coilover uses the damper technology and components as found in KW coilover kits. They’ve even built in the same factory. But there’s two main differences – the materials being used and the price, with one of those directly affecting the other. KW units use a full stainless steel strut, whereas ST ones use galvanized zinc-coated steel to bring the price down – perfect for a project like this.

Toby_Thyer_Photographer_Speedhunters-13

With all my parts and tools ready, I set aside a day to remove the old Cuscos and install the new ST XTA units. I have limited experience fitting coilovers, but failure to prepare equals prepare to fail.

Toby_Thyer_Photographer_Speedhunters-14

Needless to say, as I unbolted the old coilovers something strange happened. All the bolts came loose… with no rounding. No threading, seizing, nothing. Each coilover emerged from its housing with no bloodied fists, and I held each up into the sun like Simba in that scene from The Lion King.

There’s a good reason for this. Firstly, it’s a clean Japanese car. Secondly, it’s never seen a salted road. The engine may be in need of love, but the rest of the car has been looked after meticulously and not subjected to a life of grime, salt or mud. The last Subaru I changed coilovers on was my Forester STI – a Japanese import that’d spent a year in the UK. You guessed it, that process was the polar opposite to this one.

Toby_Thyer_Photographer_Speedhunters-17
Toby_Thyer_Photographer_Speedhunters-18

With the old units out, I gave the hubs a quick clean (as well as the top mounting points) ready to offer up the ST XTA units. The fit is perfect; no need to cut or adjust anything even to get the camber-adjustable top mounts in. I nearly fainted, although that might have also been the 30+°C weather.

The only downside was the clearance for the Cusco strut brace, but it’s a small price to pay for otherwise perfect fitment both at the top and into the hub too.

Toby_Thyer_Photographer_Speedhunters-19
Toby_Thyer_Photographer_Speedhunters-20
Toby_Thyer_Photographer_Speedhunters-23
Toby_Thyer_Photographer_Speedhunters-24

It kept getting better, too. With the ST units firmly in place, I could connect the brake lines and ABS sensor in the provided tabs. No messing, no need for cable ties – just perfect integration with the OEM clips. You’ll have to excuse my surprise here, but that’s what a lifetime of car tuning does to you. A simple, easy fitting process shouldn’t be a surprise, but it’s a welcome change, especially when embarking on the install yourself.

The rears? Exactly the same story. The STI top hats I purchased fit perfectly too, slotting snugly around the damper piston with a satisfying click, the springs firmly held in place with a billet aluminium centering piece. Everything went together as if it were OEM.

Toby_Thyer_Photographer_Speedhunters-27

To get a basic height, I took measurements off the old units and set the ST XTAs to what I thought would give a similar height. Compared to the heavy, seized spring perch of the Cusco ones, the ST springs move freely meaning ride height can be adjusted in seconds.

As an added bonus, the ST XTA spring perches are made of a friction-optimised polyamide composite material with a stainless steel insert. Sounds jazzy, right? Essentially, that prevents any corrosion occurring between the spring and the strut body. Technology passed down from the halo KW range.

Toby_Thyer_Photographer_Speedhunters-28
Toby_Thyer_Photographer_Speedhunters-30

Once I set the front and back heights, I took a step back to see how the car sat. The fronts were a bit low and the rear far too high. No issues however, simply jack it back up, wind the springs down and continue until happy.

It’s difficult to see in the photos, but the rear wheels have positive camber due to the ST XTA lower hub mounting tabs (which are more in line with the OEM shape) versus the old Cusco units which increased camber. It’ll need proper alignment and setting anyway, so this will get resolved later on.

Toby_Thyer_Photographer_Speedhunters-33

I’ll get on to that once I’ve got the rest of the mechanics and bushings up to scratch. Remember that list I was telling you about earlier on? Yup, it’s a big one. And I’ve just added a wheel alignment to it, but it’ll be absolutely worth it in the end.

Toby_Thyer_Photographer_Speedhunters-38
Toby_Thyer_Photographer_Speedhunters-41

Even with my limited tools and experience, it’s been a properly rewarding process fitting my Impreza with this XTA coilover kit. What I anticipated to be a pig of a job turned out to be super easy, and it won’t be long until the fun really begins.

I say that, because on the next episode of Fixing Broken Old Japanese Cars On My Driveway I’ll be pulling out the EJ boxer engine, breaking it open and (attempting) to replace the internals. On my kitchen table.

The anxiety is already kicking in, but until then it’s time to go put some more miles on Project GC8.

Toby Thyer
Instagram _tobinsta_
tobythyer.co.uk

The SH Garage on Speedhunters

ADVERTISEMENT

OFFICIAL SPEEDHUNTERS SUPPLIERS

Team Speedhunters

Editorial Director:
Brad Lord
Commercial Director: Ben Chandler
Creative Director: Mark Riccioni
Contributing Editor:
Dino Dalle Carbonare
Technical Editor: Ryan Stewart
Contributors: Will Beaumont, Keiron Berndt, Jordan Butters, Ron Celestine, Mario Christou, Cian Donnellan, Matthew Everingham, Blake Jones, Stefan Kotze, Vladimir Ljadov, Paddy McGrath, Rick Muda, Sara Ryan, Trevor Yale Ryan, Dave Thomas, Toby Thyer, Simon Woolley, Naveed Yousufzai


SH Garage: Pushing The Limits Of Project GC8

<!–

SH Garage: Pushing The Limits Of Project GC8 – Speedhunters



SH Garage: Pushing The Limits Of Project GC8

The Purchase

There are two ways in life: the quick way and the long way. If we use food as an analogy to unfold this deeply profound philosophy, the quick way is Uber Eats and TV dinners, while the long way is slaving over a hot stove while following a Michelin-star chef’s recipe and feeling a real sense of achievement when belts are loosened at 9:00pm.

Almost everything in life is better when we take the time to savour the moment and really put in the hard yards. It allows us time to make plans, contemplate outcomes and work out how to get there. It also helps to eliminate any chance of things going wrong, although, Sod’s law dictates that something will always go wrong. Bracing for the inevitable, the best we can do is take it slow and do it properly the first time.

Toby_Thyer_Photographer_Speedhunters-2

As they say, if something’s worth doing, it’s worth doing right. These profound words of wisdom also ring true when it comes to building cars. And when it comes to modifying or repairing our pride and joy, the stakes are a little higher.

Toby_Thyer_Photographer_Speedhunters-5

I’ve learnt my lesson in the past, rushing things with my project cars and ultimately making them worse. This one will be different, or at least that’s the plan.

As is often the case with rare old cars, my GC8 was at the other end of the country, which meant I bought it sight unseen after a late-night, Asahi-fuelled Yahoo! Auctions Japan bidding battle. Win!

To be fair, the car was very true to its photos and listing blurb. Mostly. The body is straight and paint the is excellent, but unfortunately some specifics were omitted from the mechanical description. The ad stated: “engine runs fine with no problems, but 3rd gear sometimes pops out.”

The latter part of that statement I could deal with, because a 6-speed swap from a newer GD series STI was on the cards regardless. But the first half of that statement did not really tell the full truth. While the engine did indeed run fine, boosting nicely and not leaking oil from every orifice, there’s a subtle rattling sound coming from deep within.

Toby_Thyer_Photographer_Speedhunters-9

I’m generally a pretty trusting guy, and even more so in Japan where I stupidly think that people are 100% trustworthy and honest. Because of this I didn’t really listen carefully to the engine when I collected the car, and with a photoshoot to get to I simply drove my auction win away into the sunset.

Toby_Thyer_Photographer_Speedhunters-10

After the shoot I stopped to take some pics of the new car, and in the quiet of the night it was soon obvious that the engine did in fact have a problem. By the time I emailed the seller, I was told “I didn’t hear anything, why didn’t you say something?”

Honestly, I’m actually at peace with the whole thing and looking forward to replacing the engine’s innards soon. Considering how much I won it for at auction, I’m pretty happy anyway.

The Trip

Toby_Thyer_Photographer_Speedhunters-16

Before I start pulling the WRX apart and replacing everything, I wanted to see what the weak points of the car are. A visual inspection would have probably been enough, but where’s the fun in that?

When I headed to Nagano Prefecture for an event recently, I had two choices: take the toll roads and get there in two hours, or take the scenic route and get there in five. Obviously, I decided to go the long way and make a kind of touring holiday out of it. It would be a good opportunity to just enjoy the car before it goes in for surgery. After all, taking things slow is my new zen, remember?

Toby_Thyer_Photographer_Speedhunters-18
Toby_Thyer_Photographer_Speedhunters-22
Toby_Thyer_Photographer_Speedhunters-30

Pushing the plucky little Impreza through the twisting mountain roads, it was easy to imagine how McRae and Burns must have felt on WRC tarmac stages. The sparse interior allows a direct connection to the outside world; the rush of the wind, growl of the motor and gentle pssshhh of the turbo blow-off valve make every corner a delight.

Toby_Thyer_Photographer_Speedhunters-31
Toby_Thyer_Photographer_Speedhunters-32

And boy, there were a lot of corners.

Taking the scenic route means leaving Kanagawa Prefecture, going past Mt. Tanzawa and heading into the highlands of Yamanashi Prefecture. From there it’s a couple of hours driving through the Minami Alps past Mt. Kita (Japan’s second largest mountain after Mt. Fuji) and Mt. Aka until finally arriving in Nagano Prefecture where Nagano City has an altitude of 371.4m.

Toby_Thyer_Photographer_Speedhunters-35

Even though I had an evening photoshoot to get to, I could not resist stopping at what seemed like every mountain pass to take photos of either the car, the road or the view. It’s a trip that I won’t forget any time soon. A soak at one of Nagano’s local onsen was a welcome respite from the day’s drive.

The Test

Toby_Thyer_Photographer_Speedhunters-36

This isn’t the first road trip I’ve had in Project GC8. Some of you may remember I that I drove it home from Tokushima, a 12-hour trip, if not you can check out that story here. What I didn’t tell you was that, because of the aforementioned engine issue, I babied it, keeping revs under 4,000rpm for most of the way.

That’s why this trip was so much fun. I just stopped worrying about things and just enjoyed the drive. Knowing that I’d be replacing most of the engine, I wound down the windows and removed the exhaust silencer which drowned out the mild-but-ominous ticking from under the hood. I wanted to see how the suspension components had held up after years of track use. I was never going to really lean on it, because I didn’t want to be stuck on a mountain with a conrod lodged in my radiator, but I could at least hit boost every now and again and focus on the handling.

Admittedly, to really test the limits of an Impreza, it really needs to be driven on a track, but with very few cars on the road, I was able to attack the tight corners of these mountain roads with enough vigour to get an idea of how things are holding together. Surprisingly, the tired and worn Dunlop Direzza tires did a pretty decent job keeping grip.

Toby_Thyer_Photographer_Speedhunters-13

Less surprising was the lack of body roll through these corners. The Cusco half cage and strut tower braces make the chassis and body very tight indeed with little-to-no flex. Steering is direct and basically the GC8 will just go anywhere you point it. However, left-hand turns induce an irritating squeal from the steering pump and right-hand turns invokes a lovely whir from the front drive shaft, or somewhere in that vicinity.  

Toby_Thyer_Photographer_Speedhunters-40

Once I started pushing the car through some serious corners it became obvious that each side of the car was handling differently; the left side hard and the right side soft. When you’re driving a car renowned for its balance and low center of gravity, having mismatched coilovers is like Usain Bolt running with a trainer on his left foot and a stiletto on his right.

Toby_Thyer_Photographer_Speedhunters-43

The Verdict

Overall, despite the elephant in the room (or in the cylinder block), the little Impreza is in good structural and cosmetic condition and is an absolute joy to drive. It’s a very direct, visceral and sensory-tickling experience which will only improve with some attention to its worn parts.  

Toby_Thyer_Photographer_Speedhunters-66

As I’ve said before, these cars were never built from the factory as rally cars or track weapons. Basically, they were sold – especially in the case of the Type RA – as a base car for works teams, privateers and hobbyists to build into race cars as they deemed fit. Subaru were not, and still are not, a big company compared to the likes of Nissan and Toyota, so manufacturing costs had to be kept low in some places to make any profit. Considering that 99% of this car is stock, I think it’s held up pretty well.

Toby_Thyer_Photographer_Speedhunters-60
Toby_Thyer_Photographer_Speedhunters-62

Half of the modifications it does have are inside the cabin. There’s a Sparco bucket for the driver, HKS boost meter and a Lamco triple gauge set, a Momo wheel and of course an ETC reader who reminds you to insert your card every time you turn the key.

Toby_Thyer_Photographer_Speedhunters-46

Being a Subaru, this one, like most, has lived a colourful life, and it’s been setup for light track work and spirited road driving. It came with some extra goodies, those I’ve mentioned already plus a Cusco rear diff brace and master cylinder stopper, as well as Endless brake lines and pads.

Toby_Thyer_Photographer_Speedhunters-54

The weak points are definitely all the bits made of rubber. After 22 years and 170,000km it’s safe to say all the suspension bushings need replacing with OEM STI items. The engine, gearbox and rear diff mounts could all probably do with being upgraded to poly bushings too. Further inspection found a ripped open steering rack boot.

The Next Step

Toby_Thyer_Photographer_Speedhunters-63

So, what’s next? Well, like a newlywed couple planning their honeymoon weekend away in Tahiti, I’m busy planning the purchase of all the new internal parts for the EJ boxer engine. It’s all very exciting, although I’ve never got as far as a honeymoon so I can’t compare.

The Cusco coilovers have to go because they have either not been looked after or have just given up the ghost of their own accord. Thankfully, one of Speedhunters’ fantastic Official Suppliers has stepped in to help in this department, and I look forward to bringing you that story in due course.

Toby Thyer
Instagram _tobinsta_
tobythyer.co.uk

ADVERTISEMENT

OFFICIAL SPEEDHUNTERS SUPPLIERS

Team Speedhunters

Editorial Director:
Brad Lord
Commercial Director: Ben Chandler
Creative Director: Mark Riccioni
Contributing Editor:
Dino Dalle Carbonare
Technical Editor: Ryan Stewart
Concept Artist:
Khyzyl Saleem
Contributors: Will Beaumont, Keiron Berndt, Jordan Butters, Ron Celestine, Mario Christou, Cian Donnellan, Matthew Everingham, Blake Jones, Stefan Kotze, Vladimir Ljadov, Paddy McGrath, Rick Muda, Sara Ryan, Trevor Yale Ryan, Dave Thomas, Toby Thyer, Simon Woolley, Naveed Yousufzai


Anything Is Possible At Daddy Motor Works

<!–

Anything Is Possible At Daddy Motor Works – Speedhunters



Anything Is Possible At Daddy Motor Works

Welcome to Daddy Motor Works where your wildest engine swap dreams can become reality.

As you probably recall, we met up with Oto-san a while back when he showed us his soon-to-be-GR-Yaris-powered AE86 Levin drift car. As I touched in that story, engine swaps aren’t something Oto-san simply dabbles in – they’re what he does day in and day out, and it’s pretty much been that way right back to the time he was a mechanic at C&Y Sports.

daddy_motor_works_g16e_ae86_dino_dalle_carbonare_24

Oto-san is the sort of fabricator that Japan needs more of. Most modifying here revolves around bolt-on parts and kits ordered out of a catalogue, all fitted via an instruction booklet.

daddy_motor_works_dino_dalle_carbonare_42

A lot of it comes down to people only wanting aftermarket upgrades that been proven and tested countless times before, perhaps so that if it all goes wrong there’s a warranty or they can just complain to the tuner that did the fitting. That’s understandable I guess, especially when you’re talking about late-model or brand new cars, but it really does stifle creativity.

daddy_motor_works_dino_dalle_carbonare_36

Oto-san’s customers are different. They want something unique, and Daddy Motor Works is a company that can take all these ‘what ifs’ and make them come true.

daddy_motor_works_dino_dalle_carbonare_08

Not that every car that passes through the shop leaves with a motor swap; Oto-san will take care of any request. Take this SR311 Datsun Fairlady 2000 for example….

It runs the stock – albeit now worked – 2.0L four-cylinder.

daddy_motor_works_dino_dalle_carbonare_01

In was in for a little modern touch in the form of an electric power steering conversion. Oto-san does quite a lot of these, using compact steering systems from modern kei cars. They’re easily integrated to all sorts of Japanese classics, making them far more easy to live with.

The Swaps

daddy_motor_works_dino_dalle_carbonare_03

It didn’t take me long to notice the RPS13 in the corner of the shop.

daddy_motor_works_dino_dalle_carbonare_30

The eight aggressively-angled, shiny velocity stacks protruding from the center of the engine bay was instant confirmation that the Nissan’s original four-cylinder is gone.

daddy_motor_works_dino_dalle_carbonare_29

If you’re the type that doesn’t like cross-brand engine swaps, then this one’s probably not for you. But is there really anything wrong with a Toyota 1UZ-FE in a 180SX? This won’t be the most powerful S13 out there, but that wasn’t the goal.

daddy_motor_works_dino_dalle_carbonare_34

The goal was reliability, smoothness and sound. That’s three boxes checked in my book!

daddy_motor_works_dino_dalle_carbonare_04

A 1UZ would probably go quite well in this Toyota Crown Super Deluxe, but that’s not happening.

daddy_motor_works_dino_dalle_carbonare_33

And neither is this 2JZ sitting close by – such a swap is far too predictable for Oto-san.

daddy_motor_works_dino_dalle_carbonare_32

The Crown is getting a VQ25DET (that engine wrapped in plastic), the 2.5L single turbo V6 that originally powered the M35 Nissan Stagea. How’s that for unique? The DET version of the VQ was a strong motor that on paper had 280PS, but in reality made over 300 horsepower and bucketloads of torque. Mated to an automatic transmission, this old Toyota will soon be a real pleasure to drive.

daddy_motor_works_dino_dalle_carbonare_09

On the other lift were two more engine-less cars ready for heart transplants.

daddy_motor_works_dino_dalle_carbonare_10

First up, the BMW 2002. Can you guess what it’s getting? That subframe is a modified AE86 unit…

daddy_motor_works_dino_dalle_carbonare_14

No, not a Toyota engine, but a Honda F20C from an S2000. When I think of a modified or race-ready 2002 I picture a high-revving four-banger, so this is a very cool swap in my opinion.

daddy_motor_works_dino_dalle_carbonare_27

Oto-san reassured me that the Hakosuka was only in for an engine refresh, so will continue to run the stroked L-series that’s been powering it for a while now.

daddy_motor_works_dino_dalle_carbonare_18

On the floor next to the Skyline were the headers, exhaust system and intake setup.

daddy_motor_works_dino_dalle_carbonare_13

The SSR MKIIIs get a big thumbs up from me; the gold centers are a great look against the Skyline’s glossy red paint.

The Machine Shop

daddy_motor_works_dino_dalle_carbonare_26

There is very little that Oto-san orders from a catalogue – other than sheet metal and steel tubing that is. All fabrication is done in-house, and there’s enough machinery on the far side of the shop to bring all his ideas to life.

daddy_motor_works_dino_dalle_carbonare_22

From the lathe and drill bench to multi-axis drill machine and pipe bender – Oto-san has pretty much every tool he needs.

daddy_motor_works_dino_dalle_carbonare_19

He’s even modified this sheet metal bender with a Nardi steering wheel. He uses the bender so much that he figured it might as well look and feel special.

daddy_motor_works_dino_dalle_carbonare_20

The main workbench is where components are laid out and cleaned up when rebuilding or upgrading engines, transmissions, differentials, or anything else that needs attention.

daddy_motor_works_dino_dalle_carbonare_15

Like any shop that specializes in this sort of work, there is a seemingly endless array of parts laying around. From bits and pieces to be used on current projects….

daddy_motor_works_dino_dalle_carbonare_16

…To stuff that will be stocked up and used another time on future builds.

daddy_motor_works_dino_dalle_carbonare_17

Whatever it was, it was just fun finding out from Oto-san what things were.

daddy_motor_works_dino_dalle_carbonare_37

On each side of the workshop is a mezzanine level. One side is reserved for storage, and that includes a BBQ grille for those important shop cook-outs.

daddy_motor_works_dino_dalle_carbonare_41

The other side is where Daddy Motor Work’s air-conditioned office is located. Check out the old Speedhunters stickers I gave Oto-san when I first met him back in the day.

daddy_motor_works_dino_dalle_carbonare_40

This is where Oto-san meets his clients and sits down to talk ideas.

The setup really does maximize the available space.

daddy_motor_works_dino_dalle_carbonare_45

The large paved yard in front of the shop is where Oto-san’s donor cars are stored. They’re constantly giving up bits and pieces so that new projects can be completed and made functional.

daddy_motor_works_g16e_ae86_dino_dalle_carbonare_02

If you’re anything like me, I’m sure you can’t wait for Oto-san to finish the G16E-powered AE86. Hopefully we’ll get to see it before the 2022 Tokyo Auto Salon in January next year.

Dino Dalle Carbonare
Instagram: dino_dalle_carbonare
dino@speedhunters.com

ADVERTISEMENT

OFFICIAL SPEEDHUNTERS SUPPLIERS

Team Speedhunters

Editorial Director:
Brad Lord
Commercial Director: Ben Chandler
Creative Director: Mark Riccioni
Contributing Editor:
Dino Dalle Carbonare
Technical Editor: Ryan Stewart
Concept Artist:
Khyzyl Saleem
Contributors: Will Beaumont, Keiron Berndt, Jordan Butters, Ron Celestine, Mario Christou, Cian Donnellan, Matthew Everingham, Blake Jones, Stefan Kotze, Vladimir Ljadov, Paddy McGrath, Rick Muda, Sara Ryan, Trevor Yale Ryan, Dave Thomas, Toby Thyer, Simon Woolley, Naveed Yousufzai


For GREAT deals on a new or used Nissan check out Mossy Nissan National City TODAY!

Pro Shop Wave, Drifting Since 1992

<!–

Pro Shop Wave, Drifting Since 1992 – Speedhunters



Pro Shop Wave, Drifting Since 1992

Long before drifting became a professional motorsport – more than a decade before Formula D cars slapped on their first wraps, and even before the birth Japan’s own D1 Grand Prix series – Pro Shop Wave was building and tuning drift cars for local drifters in Kanagawa, Japan. 

As usual, I found Pro Shop Wave purely by chance. Driving past the shop on my way home from Odawara Castle, drift cars, piles of tires and parts, and the unmistakable face of a Hakosuka Skyline peering out from a dark garage drew me in for a closer look.

Toby_Thyer_Photographer_Speedhunters-17
Toby_Thyer_Photographer_Speedhunters-15

Out front the team were working on a drift-hardened S14 Nissan Silvia, but they were more than happy to chat and let me take some photos.

Toby_Thyer_Photographer_Speedhunters-3

Pro Shop Wave has been located here since 1992, and I don’t think the shop’s changed much since then. Time has not been kind to the building; vines and rust are slowly reclaiming it for the earth. If you block out the traffic from the adjacent freeway, you could almost imagine this shop servicing Mad Max-esque machines in a post-apocalyptic world where drift cars rule the roads.

Toby_Thyer_Photographer_Speedhunters-10
Toby_Thyer_Photographer_Speedhunters-60

To say Pro Shop Wave is well established would be the understatement of the year. Expanding on my opening comment, the company opened its doors eight years before the first D1 Grand Prix event and 12 years before the first Formula D competition. Of course, drifting was already popular in Japan in 1992, as the first organized drift event had happened six years prior.

Toby_Thyer_Photographer_Speedhunters-14
Toby_Thyer_Photographer_Speedhunters-8

Pro Shop Wave are the guts and muscle behind sister company B-Wave, who make really cool custom parts for drift cars, and also for people-movers like the Honda Odyssey. Their body kits are even available on Japanese online shopping giant Rakuten.

Toby_Thyer_Photographer_Speedhunters-22
Toby_Thyer_Photographer_Speedhunters-23

One of the mechanics I talked to told me that he, along with a few other staff members, were part of the Night Walkers street racing team. They’ve been around forever, racing mostly four-door sedans like the Toyota Chaser and Nissan Laurel. The Night Walkers have produced a couple of pro drifters from their ranks, notably Tomokazu Hirota.

Toby_Thyer_Photographer_Speedhunters-28

Back in the day, Hirota-san was famous for being one of the only D1GP drifters to run a Toyota Verossa, a model I’d never seen or heard of before. The car’s 2.5L 1JZ-GTE and fine tuning helped him take second place at Round 4 of the 2008 season, and Keiichi Tsuchiya even crowned him ‘D1’s best Verossa drifter’.

Toby_Thyer_Photographer_Speedhunters-29
Toby_Thyer_Photographer_Speedhunters-13

Looking around the place, I was interested to find out how Pro Shop Wave has managed to survive as a business for almost three decades. If you check out their website, you’ll find all their aero parts, gauge clusters, suspension and engine components, which I’d say probably make up a substantial part of their revenue. If you’re looking for period-correct JDM drift style, the parts are all perfect; my guess is the designs haven’t been changed since they first hit the market. I personally love the 180SX body kit.

Toby_Thyer_Photographer_Speedhunters-31
Toby_Thyer_Photographer_Speedhunters-34

If the online shop is the bread and butter, then working on customer cars must be Pro Shop Wave’s pudding. Adding to this, motorcycles – classic, custom and contemporary – are also restored, modified and maintained from the premises.

Drifting is a legit hobby in Japan and not just for people wanting to relive the ’90s. Apparently young kids are getting into the sport too, but it’s not cheap to buy a base car anymore. The rapidly rising value of 180SXs and even Chasers is enough to make the eyes of a sea otter water, but once that initial purchase is taken care of, drift consumables like wheels, tyres and fuel are all pretty cheap in Japan.

Toby_Thyer_Photographer_Speedhunters-39
Toby_Thyer_Photographer_Speedhunters-45
Toby_Thyer_Photographer_Speedhunters-52

This is great news for drivers, small shops like Pro Shop Wave, and for Japanese motorsport in general. The more young people and grassroots drivers there are developing their skills on the various circuits in Japan, the higher the chance for pro drivers to emerge and inject both talent and revenue into the industry.

Toby_Thyer_Photographer_Speedhunters-59
Toby_Thyer_Photographer_Speedhunters-57

Of course, keeping the drift spirit alive has a great cultural effect too.

Toby_Thyer_Photographer_Speedhunters-66
Toby_Thyer_Photographer_Speedhunters-63

I really cherish workshops like this, and hunting them out – or just randomly chancing upon them, as was the case here – is possibly my favourite part of Speedhunting. Finding companies like Pro Shop Wave is just my style – junk everywhere, cars in pieces, colourful characters elbow-deep in engine bays who are happy to shoot the breeze.

For a ’90s JDM drift nostalgia trip, you can see Pro Shop Wave’s blog here. And check out YouTube for a few Night Walkers videos here.

Toby Thyer
Instagram _tobinsta_
tobythyer.co.uk

ADVERTISEMENT

OFFICIAL SPEEDHUNTERS SUPPLIERS

Team Speedhunters

Editorial Director:
Brad Lord
Commercial Director: Ben Chandler
Creative Director: Mark Riccioni
Contributing Editor:
Dino Dalle Carbonare
Technical Editor: Ryan Stewart
Concept Artist:
Khyzyl Saleem
Contributors: Will Beaumont, Keiron Berndt, Jordan Butters, Ron Celestine, Mario Christou, Cian Donnellan, Matthew Everingham, Blake Jones, Stefan Kotze, Vladimir Ljadov, Paddy McGrath, Rick Muda, Sara Ryan, Trevor Yale Ryan, Dave Thomas, Toby Thyer, Simon Woolley, Naveed Yousufzai


A Brake Restoration For Project Nine

<!–

A Brake Restoration For Project Nine – Speedhunters



A Brake Restoration For Project Nine

Free Time & Fresh Plans

Time stops for no man. I’m reminded of this by the inevitable wave of guilt that crashes down around me every single time I start writing and realise just how long it’s been since the last Project Nine update.

But I guess the silver lining of zero updates means that my Mitsubishi Lancer Evolution IX has been behaving, right? This is true; since our last update the car hasn’t skipped a beat. It’s been driven daily, punctuated with a handful of spirited mountain runs to keep me sane, but sadly I’ve not had the time to get out on a track since our last story.

ProjectNine-Matthew-Everingham-Oxytech-Brembo-Restoration_150

Oh yeah, and I guess we shouldn’t forget that little Covid situation… So little happened in my life during 2020, that I quite frequently forget it existed at all. My memory must be stored by events and not dates, because I always refer to 2019 as ‘last year’ or a ‘few months ago.’ That’s a great excuse for about 12 months’ worth of silence.

_8005766_small_SH

One positive to come from the enforced downtime was actually having enough spare time on my hands to think seriously about how I’d best like to shape my Evo moving into the future.

_8005899

It’s been my faithful accomplice for quite a few years now, so I’ve decided to spend a little more time and effort in 2021 to restore the car’s weaker and more worn components.

For a performance enthusiast, I think the Evolution IX represents the pinnacle of Mitsubishi. There’s no need to rewrite an already solid package. I’m not interested in hitting 12,000 horsepower on the dyno, making it a dedicated track car, or becoming a speedhump-fearer.

DSC_2501small

The goal here is to chase an OEM+ look and feel. I’ll be aiming to take advantage of some of the technological advancements over the last 15 years to enhance the already brilliant package Mitsubishi released from the factory.

Brembos, Sweat & Powder

The most sensible place to start our renewed project is to restore what bugged me most about the car. After all, a chain is only as strong as the weakest link, and that link for the Evolution – at least aesthetically speaking – was faded Brembo callipers.

ProjectNine-Matthew-Everingham-Oxytech-Brembo-Restoration_147

The original vibrant red was roasted to a flakey brown during some ultra-high temps at Sydney Motorsport Park chasing down a friend’s NSX. For the longest time, I tried to ignore how much they detracted from the vehicle’s overall appearance.

ProjectNine-Matthew-Everingham-Oxytech-Brembo-Restoration_052

Scotty Barter, a mate of mine who happens to sell all the good stuff a powder-coater craves, had offered to help restore the poo-coloured Brembos a few times over the last couple of years. A kind gesture and a genuine offer for sure. ‘Yeah yeah, we’ll talk about it later,’ was my usual reply. It’s not that I wasn’t interested, I just know how busy Scotty is running Oxytech, raising a family, helping out other mates’ builds and trying to find time to work on his own project cars.

But eventually, the universe conspired against my faded callipers. I got the call to shoot Scotty’s freshly-finished and very tough ’56 Chevy work truck for Aussie magazine Street Machine. During a chilled night of photography, rum and pizza, it was agreed that I’d finally take up his generous offer and we’d give Project Nine the calliper refresh she deserved. And while the brakes were removed, my tired-looking RAYS Volk Racing CE28Ns would also cop a fresh coat of powder.

Whiteline_ProjectNine_Everingham_Speedhunters_ (175)

In hindsight, I doubt I would have ever agreed if I had a full understanding of the time and effort involved beforehand. Like most automotive projects, the bulk of the work hides within the preparation – in this case a plethora of tiny tasks that take hours. In comparison, the main tasks of blasting and applying powder were by far the quickest and most fun elements of the restoration.

The Process

ProjectNine-Matthew-Everingham-Oxytech-Brembo-Restoration_023

It’s not a difficult task by any means, it’s actually a pretty straightforward job. Nonetheless, I appreciated having Scotty on hand to help out. The experience he brought along after having done dozens of similar restorations made the task as simple and quick as possible.

If you’re considering a similar restoration and not sure where to begin, grab a coffee and get comfortable; Scotty and I documented the entire process. While strictly speaking this isn’t a guide, it should still be detailed enough to be somewhat useful. Even if it’s just for sizing up the scale of the job before choosing to DIY or throw cash at the problem.

OK, let’s get started. Removing the wheels and brakes is straightforward, and frankly, if this is outside of your comfort zone, you should probably be paying to get the job done. Be mindful to place your brake pads in a way that’ll ensure they all go back in the same location and rotor side. Oh, and get yourself a brake line clamp kit to save a lot of mess. Brake fluid is not your friend.

ProjectNine-Matthew-Everingham-Oxytech-Brembo-Restoration_021

Before you get carried away splitting your callipers, give them a good inspection and check that you’ve got all the replacement seals and any other ancillary parts that may need to be replaced. Give each calliper a solid inspection for other signs of damage. Callipers are usually bullet-proof, but trust me, you’ll want to find any extra issues at this point and not further into the process.

ProjectNine-Matthew-Everingham-Oxytech-Brembo-Restoration_033

If you’ve decided you’ve got what you’ll need to proceed, godspeed and good luck. Loosen those nipples and use compressed air to blow out the seals and pistons through the bleed valve. Follow up by removing the nipples, lines, and seals. You can remove the squealer pads, but you’ll need a Torx bit and some patience. Lastly, and of course the least fun bit, you’ll need to crack the Allen bolts and separate the two calliper halves to prepare for a proper stripping.

ProjectNine-Matthew-Everingham-Oxytech-Brembo-Restoration_030

In our case, we’ve used Oxytech’s own Classique Strip AS-3. I blinked with a vacant stare when Scotty told me it’s a methylene chloride-based solution that strips quickly even at ambient temperatures. I smiled politely, but really I was thinking how fancy the word ‘classic’ looks with a slight variation in spelling.

ProjectNine-Matthew-Everingham-Oxytech-Brembo-Restoration_148
ProjectNine-Matthew-Everingham-Oxytech-Brembo-Restoration_054

Each piece was hand rinsed in some fresh water, but instead of leaving them out to dry we had the luxury of baking them in the oven for 20 minutes to help remove any residual stripper.

ProjectNine-Matthew-Everingham-Oxytech-Brembo-Restoration_045
ProjectNine-Matthew-Everingham-Oxytech-Brembo-Restoration_046

While the bare Brembos received a light sandblasting all the external bolts, plates, and bits were lined up for a tidy up using some general thinners and a bit of wire brush action. This was completely optional; I guess it’s up to you how far you take the restoration, but what’s the point in pulling it all apart to stop halfway?

ProjectNine-Matthew-Everingham-Oxytech-Brembo-Restoration_057

We took a particular interest in the bolts as we planned on giving their heads a very light colour coat, too.

ProjectNine-Matthew-Everingham-Oxytech-Brembo-Restoration_064

Before blasting or sanding, be sure to fill in any gallery entries and cover any factory machined surfaces. Scotty used an #80 mesh aluminium oxide blasted on low pressure.

The beads aren’t too harsh, and in his experience they leave a mint profile. Believe it or not, now we’re finally ready to lay the first coat of powder.

The nerds in here who don’t already know how a powder gun works will find it all more interesting than they’d probably presumed; I know I did. The gun actually strips away a heap of the electrons as it excites the powder before discharging. Remember as a kid rubbing a balloon through your hair to make it stand up? Well, the same principle is what ensures a nice even coat here. The negatively charged particles move and cling to the nearest earth point, which happens to be what you’re trying to coat in perfectly flat powder.

See, way more interesting than you probably thought.

ProjectNine-Matthew-Everingham-Oxytech-Brembo-Restoration_076

Scotty shot the first batch and explained the process: distances, motion, quantity. It looked pretty simple.

ProjectNine-Matthew-Everingham-Oxytech-Brembo-Restoration_093
ProjectNine-Matthew-Everingham-Oxytech-Brembo-Restoration_097

But for some reason when it was my turn to let loose I ended up with more powder on me than the callipers. At least it gives you guys and gals a chance to appreciate my amazingly non-traditional colour choice; Dormant Purple.

ProjectNine-Matthew-Everingham-Oxytech-Brembo-Restoration_098

You’ll notice the two colours in the oven? The callipers enter the oven purple and exit silver after being baked at 200°C (392°F) for 35 minutes. After cooling a second coat is applied. It’s technically a clear coat, but it reacts with the base coat to create the final deep purple. There’s a time-lapse of the transition in a video I prepared at the end of this post.

Now all that’s left is to break out the new seal kit and repeat the dismantling process in reverse.

ProjectNine-Matthew-Everingham-Oxytech-Brembo-Restoration_142

Take your time and be extremely careful when removing the blanks you fitted to protect the machined surface; you’d hate to get this close to the finish line before you screw it up and damage your pristine brakes.

ProjectNine-Matthew-Everingham-Oxytech-Brembo-Restoration_143

That’s a lot of instruction for a seal kit. Just make sure you grease up the piston seals and don’t forget about the centre seal that unifies both sides.

My new Brembo heatproof decals were sourced online. I’d purchased a set for my old Evolution VII and they survived years of abuse.

ProjectNine-Matthew-Everingham-Oxytech-Brembo-Restoration_145

It’s amazing how a splash of colour can make such a difference. I copped a lot of ‘naysaying’ amongst mates when the bold colour choice was mentioned, not that it matters, but most of them have come around to the idea now.

ProjectNine-Matthew-Everingham-Oxytech-Brembo-Restoration_137

To help finalize the transformation, Scotty also sandblasted my tired-looking CE28Ns and gave their lips a quick polish too.

ProjectNine-Matthew-Everingham-Oxytech-Brembo-Restoration_019

Purists may scream and hunt me down for blasting away Volk Racing’s iconic anodized bronze finish, but I think Toyota 1G3 Magnetic Grey really suits these wheels.

ProjectNine-Matthew-Everingham-Oxytech-Brembo-Restoration_020

The wheels aren’t complete yet – there are still a few little touches to add – but hopefully everything will arrive soon and we can do the full reveal on an upcoming drive day with mates. I’m pretty keen on putting these new Yokohama Advan A052 tyres through their paces, so will report back soon.

[embedded content]

It’s so easy to only focus on modifying the bigger ticket items, so I hope that by seeing the impact this relatively small job has made to the car, it will motivate you to also think smaller and start attacking a few of those easy-to-ignore jobs of your own.

In the meantime, I cut a quick video of the calliper restoration process. I’m fairly new to video, so don’t expect a full-blown production, but I do hope it helps.

Matthew Everingham
Instagram: matthew_everingham
matt@mattheweveringham.com

Gallery

ADVERTISEMENT

OFFICIAL SPEEDHUNTERS SUPPLIERS

Team Speedhunters

Editorial Director:
Brad Lord
Commercial Director: Ben Chandler
Creative Director: Mark Riccioni
Contributing Editor:
Dino Dalle Carbonare
Technical Editor: Ryan Stewart
Concept Artist:
Khyzyl Saleem
Contributors: Will Beaumont, Keiron Berndt, Jordan Butters, Ron Celestine, Mario Christou, Cian Donnellan, Matthew Everingham, Blake Jones, Stefan Kotze, Vladimir Ljadov, Paddy McGrath, Rick Muda, Sara Ryan, Trevor Yale Ryan, Dave Thomas, Toby Thyer, Simon Woolley, Naveed Yousufzai


For GREAT deals on a new or used Chevrolet check out Martin Chevrolet – GM iMR TODAY!

Nine Weeks To Build A World Beater

<!–

Nine Weeks To Build A World Beater – Speedhunters



Nine Weeks To Build A World Beater

Time is always the enemy of any motorsport project.

From grassroots to the very top of the game, there isn’t an engineer or car builder anywhere in the world that wouldn’t appreciate just a little bit more time. I don’t believe there’s a motorsport (which I’ve encountered anyway) where builds have not come down right to the wire.

This isn’t a reflection on poor time management (although sometimes it is), but rather trying to make the most of every last available day, hour, minute and second.

2021 Nissan Silvia JD130 Speedhunters by Paddy McGrath-8

When James Deane received his invitation to compete in the 2021 Russian Drift Series (RDS) late last year, it was known from the get-go that time most certainly wouldn’t be on his side. James would have just 10 weeks in total to build a car from the ground up before shipping it to Mother Russia to compete alongside his new Aimol teammates, Daigo Saito and Charles Ng.

Unlike other pro drivers, this wouldn’t be a case of sending a bank transfer or a briefcase full of cash to a workshop and picking a new car up at some stage in the future. James, his family and his team are hands-on with all of his cars, and with the exception of the paint, roll cage and wiring, this build was completed at home.

Ultimately, James only needed nine weeks to create his interpretation of the ultimate S-chassis pro drift car.

2021 Nissan Silvia JD130 Speedhunters by Paddy McGrath-6

Delivery of a standard S14 shell was taken in late December, but work didn’t commence on the car until January 4th, 70 days from when it was due to be loaded into a container.

Progress began with removing the sound deadening with dry ice before creating the front and rear tubs, stitch-welding the chassis and having a custom cage crafted to suit James’ seat position relative to his height. In addition to this, the seams of the shell were sealed to prevent tyre smoke ingress into the cabin.

By January 24th, 20 days later, the fabrication of the shell was completed and it was sent for paint. With Ireland in a Level 5 lockdown, the one upside is that there was little choice but to stay inside and work on preparing the car.

2021 Nissan Silvia JD130 Speedhunters by Paddy McGrath-11

There’s a reason why an S-chassis was chosen and it’s almost entirely down to James’ familiarity with them and the availability of parts.

“It’s an S-chassis; we know what we want to do. We learned a lot over the years. I’ve had all my ideas that I wanted to change and improve with this car over the other cars, and it definitely makes things a lot faster when you know the plan,” James said.

2021 Nissan Silvia JD130 Speedhunters by Paddy McGrath-15

On February 1st, with 42 days before the Nissan was due to ship, assembly of the car resumed when it returned from paint. Ordinarily, this would be the ‘LEGO’ stage of the build, with the bulk of the hard work completed. However, the combination of a pandemic and Brexit has thrown international shipping to Ireland into complete disarray, with parcels which would normally arrive the same week taking much, much longer, if they turned up at all.

While waiting for parts to arrive, the team took to creating a spares package for the car along with installing the parts they did have to hand.

2021 Nissan Silvia JD130 Speedhunters by Paddy McGrath-13

As you can probably guess (or if you were following the build on James’ YouTube channel) , the car did come together in time, even with a few days to spare. Just about enough for a single shakedown and test session at an eerily quiet Mondello Park, where I caught up with guys for the first time in nearly a year.

That the car was built from the ground up in just 64 days is impressive, particularly when you’re dealing with drifting’s more relaxed rulebook and regulations. Because there’s always going to be the temptation to try and seek out more performance, or exploit a loophole somewhere in order to find whatever competitive advantage that can be found.

2021 Nissan Silvia JD130 Speedhunters by Paddy McGrath-12

The risk with this is introducing unnecessary complication, which might require further development at the expense of competitive edge. There’s no guarantee that said risk will provide a reward, either.

2021 Nissan Silvia JD130 Speedhunters by Paddy McGrath-22

The (not so) secret with this car – and something which is common to James’ builds – is the relative simplicity of it all. It has been a similar story with his Europe and Middle East-dominating S14A, and the Worthouse S15s also shared this mantra.

2021 Nissan Silvia JD130 Speedhunters by Paddy McGrath-25

That this photograph was captured on James’ very first run in this car should tell you everything you need to know about the benefits of a proven package and keeping things simple.

Straight off the trailer, fluids warmed, and backwards into the hairpin on Mondello’s school course – a feat that James would repeat again and again throughout the afternoon of what turned out to be a flawless test.

2021 Nissan Silvia JD130 Speedhunters by Paddy McGrath-4

But what exactly does ‘simplicity’ mean in this case? I’m sure that anyone with even a passing interest in drifting could probably take an accurate enough stab at the car’s specification: 2JZ, sequential, Wisefab and a quick-change rear end.

2021 Nissan Silvia JD130 Speedhunters by Paddy McGrath-28

It’s a bit reductionist to reduce the car down to just those terms, but while they’re not inaccurate, they do sell the car short. Contemporary pro drift cars are impressive machines, even to non-drift enthusiasts.

2021 Nissan Silvia JD130 Speedhunters by Paddy McGrath-40
2021 Nissan Silvia JD130 Speedhunters by Paddy McGrath-37

The motor is a DeaneMSPORT stock-stroke 3.0-litre 2JZ-GTE with a BorgWarner EFR 9275. At 1.0bar (14.7psi) of boost, the engine made 650hp on early runs, and by the time it was tuned to its potential, it made significantly more. This is currently without nitrous oxide, although James has said that they will consider adding the power-making gas if required later in the season.

2021 Nissan Silvia JD130 Speedhunters by Paddy McGrath-41

Suspension-wise, the car is fitted with BC Racing ER Series coilovers with external reservoirs (3-way adjustable in the rear, 2-way adjustable up front) along with the updated Wisefab front and rear kit which sees improvements in strength and trackside adjustment, and new rear compression arms which have been designed to absorb any crash impacts.

2021 Nissan Silvia JD130 Speedhunters by Paddy McGrath-5

For a modern drift car, it sits so well. Remember the early days of extra lock kits and the comedy levels of front poke?

Fitment and ride height were not insignificant factors for the build, as James wanted the car to sit just right. Suspension, wheel sizes and ride height are part of this, but the bodywork which covers the wheels is just as important.

2021 Nissan Silvia JD130 Speedhunters by Paddy McGrath-9

Having experienced the luxury of carbon-Kevlar on his Eurofighter, this was the first certainty of the build. In fact, this carbon-Kevlar S15 conversion bodykit for the S14 by Mspek Performance in the US decided the chassis for the whole build. The original plan was to use an S15, but there’s currently no suitable carbon-Kevlar kits available. I think there’s something authentically Japanese about front and rear conversions on an S-chassis.

The benefits to carbon-Kevlar are significant. Weight is one part of the equation, with the front bumper and two front fenders weighing half that of a normal fibreglass S14 bumper alone (3kg versus 6kg). The other is the material’s proven resilience against impacts and abrasions. As a perfect example, James’ Eurofighter is still wearing its original HGK kit, despite having had a 50mph impact with a wall at the Drift Masters European Championship finale in 2019.

2021 Nissan Silvia JD130 Speedhunters by Paddy McGrath-3

With the RDS having a tyre size limit of 265-section, minimising weight and prioritising its distribution played a key role in the car’s development. In a right-hand drive Silvia, you have the weight of the driver, steering, turbo, exhaust manifold and wastegates on the same side of the car.

To try and counteract this, the quick-fill Radium fuel cell with its integrated swirl pit, lift pump and two main pumps, along with the radiator, water pump and coolant header tank are located at the rear and rear-left side of the car where possible.

2021 Nissan Silvia JD130 Speedhunters by Paddy McGrath-26

This meant that the custom titanium exhaust system had to dump on the driver’s side. Because fire and fuel don’t work all that well together.

2021 Nissan Silvia JD130 Speedhunters by Paddy McGrath-29

From a transmission perspective, James is using the new Samsonas RS90 sequential gearbox, rated to 2,000hp with 4mm wider gears, 2mm wider dog rings, and an internal oil pump for improved lubrication.

The axles are Wisefab’s 1,500hp-rated Dynamic Axles which can twist to 90-degrees and feature CV joints with 45-degrees of deflection; ideal for low drift cars that squat and jump.

2021 Nissan Silvia JD130 Speedhunters by Paddy McGrath-47
2021 Nissan Silvia JD130 Speedhunters by Paddy McGrath-42

The interior is as expected – no frills and all business. A lone carbon fibre Corbeau Revenge seat with matching 6-point HANS-compatible harnesses, sequential lever, a D-MAC handbrake, PT Motorsport switch panel, and an ECUMaster display.

Beneath the custom carbon fibre S15 dashboard lies one of two ECUMaster PMU-16AS, with the other located behind the passenger side B-pillar along with the plumbed-in fire extinguisher.

2021 Nissan Silvia JD130 Speedhunters by Paddy McGrath-33

It might be a drift car as you know it, but it doesn’t make it any less impressive. Especially for a car which has come together in such short time.

2021 Nissan Silvia JD130 Speedhunters by Paddy McGrath-14

The Silvia has already been loaded into its container, along with its spares and 280 tyres for the entire RDS season. When it arrives in Russia, it will be wrapped in its team colours for the season, before taking on the unknown of a new championship along with the first FIA Intercontinental Drifting Cup to take place outside of Japan.

[embedded content]

If anything, it’s exciting to see James Deane take on new opponents in a new region. In typically understated fashion, he’s just excited to go somewhere he’s never been before, and compete against drivers he might never have met. All I know is that he’s won a championship in every region he has competed in. Time to add another to the list?

Paddy McGrath
Instagram: pmcgphotos
Twitter: pmcgphotos
paddy@speedhunters.com

James Deane’s 2021 RDS Nissan Silvia

Engine: Toyota 2JZ-GTE, ARP main studs, Titan Motorsports billet main caps, ACL Race Series bearings, stock Toyota crankshaft, ATI Damper pulley, BC connecting rods, JE Pistons (10:1 compression ratio), stock Toyota head gasket, BC valves +1mm, BC springs & retainers, BC 276 camshafts, BC adjustable cam pullies, Hypertune intake, G-Garage exhaust manifold, BorgWarner EFR 9274 turbo, Turbosmart external wastegates, FMIC intercooler, K&N air filter, Vibrant Performance custom titanium exhaust, Inovfit PTFE pipe & AN fittings throughout, Davies Craig EWP150 alloy water pump, custom radiator & fan shroud, twin Spal fans, Radium Engineering fuel cell surge tank (FSCT), Turbosmart fuel pressure regulator, Hypertune fuel rail, Injector Dynamics ID1700, Ecumaster EMU Black engine control unit, 2x Ecumaster PMU AS power management unit x2, Ecumaster ADU advanced display unit, DC Power 2JZ 240amp alternator, PT Motorsport Electrics custom wiring harness

Drivetrain: Samsonas RS90 gearbox, DSS alloy driveshaft, Wisefab Dynamic Axles, Winters Performance quick-change spool differential

Body & Chassis: Mspek Performance carbon-Kevlar S15 conversion kit, Big Country Labs 1850 carbon wing, BC Racing 3-way adjustable custom coilovers on rear, BC Racing 2-way adjustable custom coilovers on front, Wisefab S-chassis front angle kit & rear drop knuckle kit, Alcon brakes front & rear Rear, Group D hydraulic handbrake

Wheels & Tyres: 7Twenty Style 57, 18×9.5-inch, Falken Tyres RT615k+ 235/40R18 (front), 265/35R18 (rear)

Interior: 8-point custom roll cage, PD Extinguishers Haylo fire suppression system, Corbeau carbon fibre Revenge racing seat, Corbeau 6-point HANS-compatible safety harness.

2021 Nissan Silvia JD130 Speedhunters by Paddy McGrath-1
2021 Nissan Silvia JD130 Speedhunters by Paddy McGrath-2
ADVERTISEMENT

OFFICIAL SPEEDHUNTERS SUPPLIERS

Team Speedhunters

Editorial Director:
Brad Lord
Commercial Director: Ben Chandler
Creative Director: Mark Riccioni
Contributing Editor:
Dino Dalle Carbonare
Technical Editor: Ryan Stewart
Concept Artist:
Khyzyl Saleem
Contributors: Will Beaumont, Keiron Berndt, Jordan Butters, Ron Celestine, Mario Christou, Cian Donnellan, Matthew Everingham, Blake Jones, Stefan Kotze, Vladimir Ljadov, Paddy McGrath, Sara Ryan, Trevor Yale Ryan, Dave Thomas, Simon Woolley, Naveed Yousufzai